Crescendo 13"

2T5 - Indirect

PHOTOMETRY (Meets RP-1)

SPECIFICATIONS

Housing:

6063 T5 extruded aluminum.

Optical system:

Optical system constructed of highly specular aluminum to produce an indirect  distribution.

Row ends:

Mitered aluminum extrusion sculptured end caps.

Joints & Intersections:

All joints shall be accomplished using TwinLock™ joining system. Optional intersections in "L", "T", or "X" configurations, shall be mitered aluminum extrusion.

Mounting:

All mounts shall have tamper proof infinite vertical adjustment capability. Mounts shall be independently certified up to Zone 4 seismic requirements and able to accept loads up to 1000lb.

Electrical:

All luminaire sections shall be factory pre-wired to section ends, utilizing segregated raceways. Optional quick connect plugs are available.

Ballast:

Electronic: rapid start or dimming.

Approvals:

Certified to UL & CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of colors. Medium gloss finish as standard.

©1998 Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1

Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332) Email: info@ledalite.com  WWW: http://www.ledalite.com  This sheet is available on disk or at our Web site, referenced by Catalog number.

Note: Specifications subject to change without notice.