 |
Specification Data |
Minuet |
8215B01 |
1BIAX |
PHOTOMETRY
CANDELA DISTRIBUTION
| Vert Angle |
Horizontal Angle |
Zonal Lumens |
| |
0 |
22.5 |
45 |
67.5 |
90 |
|
| 0 |
194 |
194 |
194 |
194 |
194 |
|
| 5 |
194 |
194 |
193 |
194 |
192 |
19 |
| 15 |
184 |
185 |
184 |
184 |
184 |
52 |
| 25 |
169 |
170 |
169 |
168 |
169 |
79 |
| 35 |
147 |
147 |
147 |
147 |
148 |
93 |
| 45 |
121 |
121 |
123 |
121 |
122 |
95 |
| 55 |
90 |
92 |
94 |
94 |
96 |
84 |
| 65 |
56 |
60 |
65 |
66 |
68 |
63 |
| 75 |
24 |
30 |
36 |
34 |
34 |
35 |
| 85 |
2 |
8 |
11 |
11 |
10 |
10 |
| 90 |
0 |
1 |
1 |
0 |
0 |
|
| 95 |
58 |
99 |
58 |
37 |
31 |
92 |
| 105 |
210 |
426 |
589 |
530 |
498 |
492 |
| 115 |
390 |
602 |
823 |
961 |
1012 |
760 |
| 125 |
564 |
692 |
977 |
1105 |
1150 |
812 |
| 135 |
719 |
785 |
1007 |
1202 |
1258 |
767 |
| 145 |
851 |
887 |
994 |
1140 |
1199 |
636 |
| 155 |
953 |
973 |
1015 |
1074 |
1100 |
473 |
| 165 |
1022 |
1035 |
1046 |
1061 |
1067 |
297 |
| 175 |
1062 |
1065 |
1064 |
1067 |
1069 |
103 |
| 180 |
1066 |
1066 |
1066 |
1066 |
1066 |
|
COEFFICIENTS OF UTILIZATION (%)
| Ceiling |
80 |
70 |
50
0 |
| Wall |
70 |
50 |
30 |
10 |
70 |
50 |
30 |
50 |
30 |
10 |
0 |
| RCR |
|
|
|
| 0 |
76 |
76 |
76 |
76 |
66 |
66 |
66 |
48 |
48 |
48 |
8 |
| 1 |
69 |
66 |
63 |
61 |
60 |
58 |
55 |
42 |
40 |
39 |
7 |
| 2 |
63 |
58 |
53 |
49 |
55 |
50 |
47 |
36 |
34 |
32 |
5 |
| 3 |
57 |
51 |
45 |
41 |
50 |
44 |
40 |
32 |
29 |
27 |
4 |
| 4 |
52 |
44 |
39 |
34 |
45 |
39 |
34 |
28 |
25 |
22 |
4 |
| 5 |
48 |
39 |
33 |
29 |
41 |
34 |
29 |
25 |
22 |
19 |
3 |
| 6 |
44 |
35 |
29 |
25 |
38 |
31 |
26 |
22 |
19 |
16 |
3 |
| 7 |
40 |
31 |
26 |
21 |
35 |
27 |
23 |
20 |
17 |
14 |
2 |
| 8 |
37 |
28 |
23 |
19 |
32 |
25 |
20 |
18 |
15 |
12 |
2 |
| 9 |
35 |
26 |
20 |
16 |
30 |
22 |
18 |
16 |
13 |
11 |
2 |
| 10 |
32 |
23 |
18 |
14 |
28 |
20 |
16 |
15 |
12 |
10 |
2 |
Based on a floor reflectance of 0.2
SPECIFICATIONS
Housing:
6063 T5 extruded aluminum.
Optical system:
Constructed of highly specular aluminum, and a highly reflective 24 ga. metal, to
produce an indirect distribution.
Row ends:
Mitered aluminum extrusion sculptured end caps.
Joints & Intersections:
All joints shall be accomplished using TwinLock ™ joining system. Optional
intersections in "L", "T", or "X" configu-rations, shall be
mitered aluminum extrusion.
Mounting:
All mounts shall have tamper proof infinite vertical adjustment capability.
Mounts shall be independently certified up to Zone 4 seismic requirements and able to
accept loads up to 1000lb.
Electrical:
All luminaire sections shall be factory pre-wired to section ends, utilizing
segregated raceways. Optional quick connect plugs are available.
Ballast:
Electronic: rapid start.
Approvals:
Certified to UL & CSA standards.
Finish:
Thermosetting polyester, electrostati-cally applied meeting AAMA 603.8. Available in
Ledalite standard white and in a full architectural spectrum of colors. Medium gloss
finish as standard.
* This
photometry is based on the L-hole perf option.
©1997 Ledalite Architectural Products Inc. 9087A - 198th
Street, Langley, B.C., Canada, V1M 3B1
Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA
(5332) Email: info@ledalite.com WWW:
http://www.ledalite.com
Note: Specifications subject to change without notice. |
Ledalite Architectural Products Inc.