architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Ledalite Architectural Products Inc.   Minuet  

Minuet - Page 35

   

Minuet

Minuet 9" 2 T8 - Semi - Indirect

PHOTOMETRY*

Report # 2100667
Efficiency 81.9%
Peak Candela Value 1106 @ 140°
Peak : Zenith Ratio 1.1:1

CANDELA DISTRIBUTION

Vert. Angle Horizontal Angle Zonal Lumens
  0 22.5 45 67.5 90  
0 207 207 207 207 207  
5 207 207 206 207 203 19
15 197 198 198 197 196 56
25 182 183 182 183 182 84
35 160 161 161 162 160 101
45 131 135 134 136 134 104
55 99 103 103 105 104 92
65 63 69 70 75 74 70
75 26 35 42 48 47 44
85 3 10 13 15 14 14
90 0 3 5 5 5  
95 39 130 107 117 106 130
105 191 404 543 574 534 490
115 357 542 769 950 985 717
125 519 641 853 1023 1091 742
135 665 728 921 1050 1095 691
145 794 825 930 1041 1093 586
155 892 908 938 993 1023 440
165 962 967 975 986 993 276
175 997 996 997 999 1000 97
180 1000 1000 1000 1000 1000  

COEFFICIENTS OF UTILIZATION (%)

Ceiling Wall RCR 80 70 50 0
70 50 30 10 70 50 30 50 30 10 0
     
0 80 80 80 80 70 70 70 51 51 51 10
1 73 69 66 64 63 61 58 44 43 41 8
2 66 60 56 52 57 53 49 38 36 34 6
3 60 53 47 43 52 46 42 34 31 28 5
4 55 47 41 36 48 41 36 30 26 24 5
5 50 41 35 30 43 36 31 26 23 20 4
6 46 37 31 26 40 32 27 24 20 17 3
7 42 33 27 22 37 29 24 21 18 15 3
8 39 30 24 20 34 26 21 19 16 13 2
9 36 27 21 17 31 24 19 17 14 12 2
10 34 24 19 15 29 21 17 16 12 10 2

Based on a floor reflectance of 0.2

SPECIFICATIONS

Housing:

6063 T5 extruded aluminum.

Optical system:

Optical system constructed of highly specular aluminum, white pre-painted metal, and a concave perforated optical filter to produce a semi-indirect distribution.

Row ends:

Mitered aluminum extrusion sculptured end caps.

Joints & Intersections:

All joints shall be accomplished using TwinLock™ joining system. Optional intersections in "L", "T", or "X"configurations, shall be mitered aluminum extrusion.

Mounting:

All mounts shall have tamper proof infinite vertical adjustment  capability. Mounts shall be independently certified up to Zone 4 seismic requirements and able to accept loads up to 1000lb.

Electrical:

All luminaire sections shall be factory pre-wired to section ends, utilizing segregated raceways. Optional quick connect plugs are available.

Ballast:

Electronic: rapid start or dimming.

Approvals:

Certified to UL & CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of colors. Medium gloss finish as standard.

* This photometry is based on the L-hole perf option.

©1997 Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1

Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332) Email: info@ledalite.com  WWW: http://www.ledalite.com
This sheet is available on disk or at our Web site, referenced by Catalog number.

Note: Specifications subject to change without notice.



Request for Information / Request a Catalog from Ledalite Architectural Products Inc.
 
 
 
To request more information from Ledalite Architectural Products Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.