SPECIFICATIONS

Linear:

6063 T5 extruded aluminum.

Optical:

CRS steel and perforated metal formed to produce a direct indirect distrbution. Perforation 3/32" dia. to make up 32% void. U.V. stabilized and fire rated diffusing membrane ensure a luminance gradient of not more than 2:1 on perforations. Reflector material is highly specular aluminum. Micro lens comprised of extruded virgin acrylic.

Ends:

Die formed CRS with integral snap on wire access cover.

Intersections:

All joining shall be accomplished using "Twin Lock" joining systems. Optional connector: Die formed aluminum, 1/4" min. thickness available in "L", "T", or "X" configurations. Adjustment range 85 - 275 degrees c/w wiring cavity.

Mounting:

All mounts to have verticle adjustment and horizontal leveling adjustment integral. Mounts shall be independantly certified to UBC seismic zone 4 to handle 1000 lbs. load.

Electrical:

Luminaire completely factory-through wired to section ends. Optional quick connect plugs available.

Ballast:

Electronic: rapid start, instant start or dimming.

Approvals:

Certified to UL and CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and a full architectural spectrum of colors. Medium gloss finish as standard.

©1996 Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1
Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332) Email: info@ledalite.com  WWW: http://www.ledalite.com/

Note: Specifications subject to change without notice.