architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Ledalite Architectural Products Inc.   Vector II  

Vector II - Page 3

   

Vector II

 Specification Data Vector ll 2903T01 1T8

PHOTOMETRY

Optical Distribution

Efficiency 86.3%

Peak Candela Value 857 @ 120 o

Peak : Zenith Ratio 2.1:1

CANDELA DISTRIBUTION

Vert Angle

 Horizontal Angle Zonal

Zonal Lumens
  0 22.5 45 67.5 90  
0 0 0 0 0 0  
5 0 0 0 0 0 0
15 0 0 0 0 0 0
25 0 0 0 0 0 0
35 0 0 0 0 0 0
45 0 0 0 0 0 0
55 0 0 0 0 0 0
65 0 0 0 0 0 0
75 0 0 0 0 0 0
85 0 0 0 0 0 0
90 0 0 0 0   0
95 11 113 94 119 91 108
105 61 288 443 459 388 371
115 129 287 603 788 820 524
125 198 309 560 749 828 476
135 259 340 482 639 723 379
145 313 364 457 536 576 285
155 355 385 435 483 506 201
165 385 398 417 436 446 120
175 401 401 405 408 410 41
180 402 402 402 402 402  

     COEFFICIENTS OF UTILIZATION (%)

Ceiling 80 70 50 0
Wall 70 50 30 10 70 50 30 50 30 10 0
RCR                      
0 82 82 82 82 70 70 70 48 48 48 0
1 74 71 68 65 63 61 58 41 40 38 0
2 68 62 57 53 57 53 49 36 34 32 0
3 62 54 48 44 52 46 42 32 29 26 0
4 56 48 41 37 48 41 36 28 25 22 0
5 51 42 36 31 43 36 31 25 21 19 0
6 47 37 31 26 40 32 27 22 19 16 0
7 43 33 27 23 37 29 23 20 16 14 0
8 40 30 24 20 34 26 21 18 14 12 0
9 37 27 21 17 31 23 18 16 13 10 0
10 34 25 19 15 29 21 16 14 11 9 0

Based on a floor reflectance of 0.2

SPECIFICATIONS

Housing:

6063 T5 extruded aluminum.

Optical system:

Constructed of highly specular aluminum, and highly reflective 24 ga. metal, to produce an indirect distribution.

Row ends:

1/4" die formed aluminum end plate or mitered aluminum extrusion end caps.

Joints & Intersections:

All joints shall be accomplished using QuickLock joining system. Optional connectors in "L", "T", or "X" configurations, shall be mitered aluminum extrusion.

Mounting:

All mounts shall have vertical adjustment capability. Mounts shall be independently certified up to Zone 4 seismic requirements and able to handle loads up to 1000lbs.

Electrical:

All luminaire sections shall be factory pre-wired to section ends. Optional quick connect plugs are available.

Ballast:

Electronic: rapid start, instant start or dimming.

Approvals:

Certified to UL & CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of colors. Medium gloss finish as standard.

©1997 Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1

Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332)

Email: info@ledalite.com WWW: http://www.ledalite.com

Note: Specifications subject to change without notice.



Request for Information / Request a Catalog from Ledalite Architectural Products Inc.
 
 
 
To request more information from Ledalite Architectural Products Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.