architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Ledalite Architectural Products Inc.   Vector II  

Vector II - Page 5

   

Vector II

 Specification Data Vector 11 2903T02 2T8

PHOTOMETRY

Optical Distribution

Efficiency 85.1%

Peak Candela Value 1516 @ 125º

Peak : Zenith Ratio 1.6:1

CANDELA DISTRIBUTION

Vert. Angle Horizontal Angle Zonal Lumens
  0 22.5 45 67.5 90  
0 0 0 0 0 0  
5 0 0 0 0 0 0
15 0 0 0 0 0 0
25 0 0 0 0 0 0
35 0 0 0 0 0 0
45 0 0 0 0 0 0
55 0 0 0 0 0 0
65 0 0 0 0 0 0
75 0 0 0 0 0 0
85 0 0 0 0 0 0
90 0 0 0 0 0  
95 33 174 158 208 163 183
105 162 564 626 680 590 591
115 310 671 1076 1256 1165 912
125 476 719 1140 1415 1516 954
135 622 778 1098 1341 1453 823
145 747 841 1032 1207 1307 646
155 847 893 997 1082 1142 459
165 917 932 972 1000 1032 275
175 955 957 959 960 968 92
180 961 961 961 961 961  

COEFFICIENTS OF UTILIZATION (%)

Ceiling 80 70 50 0
Wall 70 50 30 10 70 50 30 50 30 10 0
RCR                      
0 81 81 81 81 69 69 69 47 47 47 0
1 73 70 67 64 62 60 57 41 39 38 0
2 67 61 56 52 57 52 48 36 33 31 0
3 61 53 48 43 52 46 41 31 28 26 0
4 55 47 41 36 47 40 35 27 24 22 0
5 51 41 35 31 43 36 30 24 21 19 0
6 46 37 31 26 39 32 26 22 18 16 0
7 43 33 27 22 36 28 23 19 16 14 0
8 39 30 24 19 33 25 20 17 14 12 0
9 36 27 21 17 31 23 18 16 13 10 0
10 34 24 19 15 29 21 16 14 11 9 0

Based on a floor reflectance of 0.2

SPECIFICATIONS

Housing:

6063 T5 extruded aluminum.

Optical system:

Constructed of highly specular aluminum, and highly reflective 24 ga. metal, to produce an indirect distribution.

Row ends:

1/4" die formed aluminum end plate or mitered aluminum extrusion end caps.

Joints & Intersections:

All joints shall be accomplished using QuickLock joining system. Optional connectors in "L", "T", or "X" configurations, shall be mitered aluminum extrusion.

Mounting:

All mounts shall have vertical adjustment capability. Mounts shall be independently certified up to Zone 4 seismic requirements and able to handle loads up to 1000lbs.

Electrical:

All luminaire sections shall be factory pre-wired to section ends. Optional quick connect plugs are available.

Ballast:

Electronic: rapid start, instant start or dimming.

Approvals:

Certified to UL & CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of colors. Medium gloss finish as standard.

 

©1997 Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1

Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332)

Email: info@ledalite.com WWW: http://www.ledalite.com

Note: Specifications subject to change without notice.



Request for Information / Request a Catalog from Ledalite Architectural Products Inc.
 
 
 
To request more information from Ledalite Architectural Products Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.