architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Ledalite Architectural Products Inc.   Vector II  

Vector II - Page 7

   

Vector II

 Specification Data Vector ll 2903T03 3T8

PHOTOMETRY

Optical Distribution

Efficiency 82.9%

Peak Candela Value 2180 @ 142.5º

Peak : Zenith Ratio 1.4:1

CANDELA DISTRIBUTION
Vert. Angle Horizontal Angle Zonal  Lumens
0 0 22.5 45 67.5 90  
0 0 0 0 0 0  
5 0 0 0 0 0 0
15 0 0 0 0 0 0
25 0 0 0 0 0 0
35 0 0 0 0 0 0
45 0 0 0 0 0 0
55 0 0 0 0 0 0
65 0 0 0 0 0 0
75 0 0 0 0 0 0
85 0 0 0 0 0 0
90 0 0 0 0 0  
95 53 217 160 204 143 197
105 267 780 725 751 620 714
115 527 1100 1379 1477 1354 1197
125 779 1214 1662 1909 1931 1369
135 1008 1307 1836 2071 2105 1302
145 1208 1392 1739 2030 2167 1073
155 1361 1458 1654 1813 1903 760
165 1468 1502 1584 1643 1685 449
175 1524 1528 1537 1540 1546 149
180 1531 1531 1531 1531 1531  

COEFFICIENTS OF UTILIZATION (%)

Ceiling 80 70 50 0
Wall 70 50 30 10 70 50 30 50 30 10 0
RCR                      
0 79 79 79 79 67 67 67 46 46 46 0
1 71 68 65 62 61 58 56 40 38 37 0
2 65 59 55 51 55 51 47 35 32 30 0
3 59 52 46 42 50 44 40 30 28 25 0
4 54 46 40 35 46 39 34 27 24 21 0
5 49 40 34 30 42 35 30 24 21 18 0
6 45 36 30 25 38 31 26 21 18 15 0
7 41 32 26 22 35 28 23 19 16 13 0
8 38 29 23 19 32 25 20 17 14 11 0
9 35 26 20 16 30 22 18 15 12 10 0
10 33 24 18 14 28 20 16 14 11 9 0

Based on a floor reflectance of 0.2

SPECIFICATIONS

Housing:

6063 T5 extruded aluminum.

Optical system:

Constructed of highly specular aluminum, and highly reflective 24 ga. metal, to produce an indirect distribution.

Row ends:

1/4" die formed aluminum end plate or mitered aluminum extrusion end caps.

Joints & Intersections:

All joints shall be accomplished using QuickLock joining system. Optional connectors in "L", "T", or "X" configurations, shall be mitered aluminum extrusion.

Mounting:

All mounts shall have vertical adjustment capability. Mounts shall be independently certified up to Zone 4 seismic requirements and able to handle loads up to 1000lbs.

Electrical:

All luminaire sections shall be factory pre-wired to section ends. Optional quick connect plugs are available.

Ballast:

Electronic: rapid start, instant start or dimming.

Approvals:

Certified to UL & CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of colors. Medium gloss finish as standard.

©1997 Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1

Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332)

Email: info@ledalite.com WWW: http://www.ledalite.com

Note: Specifications subject to change without notice.



Request for Information / Request a Catalog from Ledalite Architectural Products Inc.
 
 
 
To request more information from Ledalite Architectural Products Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.