architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Ledalite Architectural Products Inc.   Vector II  

Vector II - Page 9

   

Vector II

 Specification Data Vector ll 2903B01 1BIAX

PHOTOMETRY

Optical Distribution

Efficiency 81.9%

Peak Candela Value 1322 @ 132.5º

Peak : Zenith Ratio 1.0:1

CANDELA DISTRIBUTION

Vert.

Angle

 Horizontal Angle Zonal Lumens
  0 22.5 45 67.5 90  
0 0 0 0 0 0  
5 0 0 0 0 0 0
15 0 0 0 0 0 0
25 0 0 0 0 0 0
35 0 0 0 0 0 0
45 0 0 0 0 0 0
55 0 0 0 0 0 0
65 0 0 0 0 0 0
75 0 0 0 0 0 0
85 0 0 0 0 0 0
90 0 15 11 6 6  
95 42 144 188 186 180 181
105 234 477 718 708 671 617
115 457 642 915 1160 1242 877
125 676 777 1030 1180 1263 888
135 868 931 1075 1245 1322 840
145 1019 1061 1140 1230 1286 720
155 1146 1169 1211 1257 1282 559
165 1236 1245 1260 1278 1291 357
175 1281 1284 1284 1288 1293 125
180 1288 1288 1288 1288 1288  

COEFFICIENTS OF UTILIZATION (%)

Ceiling 80 70 50 0
Wall 70 50 30 10 70 50 30 50 30 10 0
RCR                      
0 78 78 78 78 66 66 66 45 45 45 0
1 71 67 64 62 60 57 55 39 38 37 0
2 64 59 54 50 55 50 46 34 32 30 0
3 58 51 46 42 50 44 39 30 27 25 0
4 53 45 39 35 45 39 34 26 23 21 0
5 49 40 34 29 41 34 29 23 20 18 0
6 44 35 29 25 38 30 25 21 18 15 0
7 41 32 26 22 35 27 22 19 15 13 0
8 38 28 23 19 32 24 20 17 14 11 0
9 35 26 20 16 30 22 17 15 12 10 0
10 32 23 18 14 27 20 15 14 11 9 0

Based on a floor reflectance of 0.2

SPECIFICATIONS

Housing:

6063 T5 extruded aluminum.

Optical system:

Constructed of highly specular aluminum, and highly reflective 24 ga. metal, to produce an indirect distribution.

Row ends:

1/4" die formed aluminum end plate or mitered aluminum extrusion end caps.

Joints & Intersections:

All joints shall be accomplished using QuickLock joining system. Optional connectors in "L", "T", or "X" configurations, shall be mitered aluminum extrusion.

Mounting:

All mounts shall have vertical adjustment capability. Mounts shall be independently certified up to Zone 4 seismic requirements and able to handle loads up to 1000lbs.

Electrical:

All luminaire sections shall be factory pre-wired to section ends. Optional quick connect plugs are available.

Ballast:

Electronic: rapid start, instant start or dimming.

Approvals:

Certified to UL & CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of colors. Medium gloss finish as standard.

©1997 Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1

Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332)

Email: info@ledalite.com WWW: http://www.ledalite.com

Note: Specifications subject to change without notice.



Request for Information / Request a Catalog from Ledalite Architectural Products Inc.
 
 
 
To request more information from Ledalite Architectural Products Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.