architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Ledalite Architectural Products Inc.   Vector II  

Vector II - Page 13

   

Vector II

 Specification Data Vector ll 2903B03 3BIAX

PHOTOMETRY

Optical Distribution

Efficiency 77.6%

Peak Candela Value 4296 @ 170º

Peak : Zenith Ratio 1.0:1

CANDELA DISTRIBUTION

Vert.

Angle

 Horizontal Angle Zonal Lumens
0 22.5 45 67.5 90  
0 0 0 0 0 0  
5 0 0 0 0 0 0
15 0 0 0 0 0 0
25 0 0 0 0 0 0
35 0 0 0 0 0 0
45 0 0 0 0 0 0
55 0 0 0 0 0 0
65 0 0 0 0 0 0
75 0 0 0 0 0 0
85 0 0 0 0 0 0
90 0 13 11 11 11  
95 148 248 226 191 176 268
105 829 1217 1193 1100 1052 1182
115 1558 1996 2306 2348 2331 2112
125 2256 2570 3058 3332 3346 2618
135 2857 3072 3499 3826 3928 2659
145 3391 3532 3799 4055 4177 2375
155 3814 3898 4041 4177 4238 1864
165 4103 4136 4205 4263 4289 1187
175 4256 4263 4272 4285 4292 413
180 4281 4281 4281 4281 4281  

COEFFICIENTS OF UTILIZATION (%)

Ceiling 80 70 50 0
Wall 70 50 30 10 70 50 30 50 30 10 0
RCR                      
0 74 74 74 74 63 63 63 43 43 43 0
1 67 64 61 58 57 54 52 37 36 35 0
2 61 55 51 47 52 47 44 32 30 28 0
3 55 49 43 39 47 42 37 28 26 24 0
4 50 43 37 33 43 37 32 25 22 20 0
5 46 38 32 28 39 32 28 22 19 17 0
6 42 34 28 24 36 29 24 20 17 14 0
7 39 30 24 20 33 26 21 18 15 12 0
8 36 27 21 18 30 23 19 16 13 11 0
9 33 24 19 15 28 21 16 14 11 9 0
10 31 22 17 13 26 19 15 13 10 8 0

Based on a floor reflectance of 0.2

SPECIFICATIONS

Housing:

6063 T5 extruded aluminum.

Optical system:

Constructed of highly specular aluminum, and highly reflective 24 ga. metal, to produce an indirect distribution.

Row ends:

1/4" die formed aluminum end plate or mitered aluminum extrusion end caps.

Joints & Intersections:

All joints shall be accomplished using QuickLock joining system. Optional connectors in "L", "T", or "X" configurations, shall be mitered aluminum extrusion.

Mounting:

All mounts shall have vertical adjustment capability. Mounts shall be independently certified up to Zone 4 seismic requirements and able to handle loads up to 1000lbs.

Electrical:

All luminaire sections shall be factory pre-wired to section ends. Optional quick connect plugs are available.

Ballast:

Electronic: rapid start, instant start or dimming.

Approvals:

Certified to UL & CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of colors. Medium gloss finish as standard.

©1997 Ledalite Architectural Products Inc. 9087A - 198th Street, Langley, B.C., Canada, V1M 3B1

Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332)

Email: info@ledalite.com WWW: http://www.ledalite.com

Note: Specifications subject to change without notice.



Request for Information / Request a Catalog from Ledalite Architectural Products Inc.
 
 
 
To request more information from Ledalite Architectural Products Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.