Vector II (Ledalite Architectural Products Inc.)

Vector II Asymmetry™

1 Biax - Indirect

PHOTOMETRY

OPTICAL SETTING A:

Lower wall brightness plus maximum uniformity on wall

Report# 2100283

Efficiency 70.4%

Peak Candela Value 2409 @ 127.5°

Peak: Zenith Ratio 3.2:1

Asymmetric Effectiveness* 55%

CANDELA DISTRIBUTION

Vert. Angle	Horizontal Angle					Zonal Lumens
	0	45	90	135	180
0	0	0	0	0	0
5	0	0	0	0	0	0
15	0	0	0	0	0	0
25	0	0	0	0	0	0
35	0	0	0	0	0	0
45	0	0	0	0	0	0
55	0	0	0	0	0	0
65	0	0	0	0	0	0
75	0	0	0	0	0	0
85	0	0	0	0	0	0
90	0	0	0	0	0
95	177	215	42	40	35	161
105	963	1026	190	148	129	551
115	1740	1714	326	284	250	827
125	2348	1714	445	326	380	881
135	2158	1628	543	374	397	744
145	1890	1419	624	453	432	576
155	1503	1170	684	544	507	396
165	1104	957	724	635	604	225
175	820	793	746	716	706	74
180	751	751	751	751	751

COEFFICIENTS OF UTILIZATION (%)

Ceiling	80				70			50			0
Wall	70	50	30	10	70	50	30	50	30	10	0
RCR
0	67	67	67	67	57	57	57	39	39	39	0
1	61	58	55	53	52	49	47	34	32	31	0
2	55	50	46	43	47	43	40	29	27	26	0
3	50	44	39	36	43	38	34	26	23	21	0
4	46	39	34	30	39	33	29	23	20	18	0
5	42	34	29	25	35	29	25	20	17	15	0
6	38	30	25	21	32	26	22	18	15	13	0
7	35	27	22	18	30	23	19	16	13	11	0
8	32	24	19	16	27	21	17	14	12	10	0
9	30	22	17	14	25	19	15	13	10	8	0
10	28	20	15	12	24	17	13	12	9	7	0

Based on a floor reflectance of 0.2

OPTICAL SETTING B:

Higher wall brightness with maximum efficiency & more backlight

Report# 2100284

Efficiency 81.5%

Peak Candela Value 2410 @ 130°

Peak: Zenith Ratio 2.7:1

Asymmetric Effectiveness* 56.8%

CANDELA DISTRIBUTION

Vert. Angle	Horizontal Angle					Zonal Lumens
	0	45	90	135	180
0	0	0	0	0	0
5	0	0	0	0	0	0
15	0	0	0	0	0	0
25	0	0	0	0	0	0
35	0	0	0	0	0	0
45	0	0	0	0	0	0
55	0	0	0	0	0	0
65	0	0	0	0	0	0
75	0	0	0	0	0	0
85	0	0	0	0	0	0
90	0	0	0	0	0
95	79	122	48	43	44	134
105	813	911	214	162	145	526
115	1647	1664	375	371	305	858
125	2332	1732	519	557	523	986
135	2208	1760	639	729	708	910
145	2073	1653	736	916	864	761
155	1791	1481	808	1037	1034	552
165	1448	1205	859	1117	1126	314
175	976	910	882	949	999	94
180	886	886	886	886	886

COEFFICIENTS OF UTILIZATION (%)

Ceiling	80				70			50			0
Wall	70	50	30	10	70	50	30	50	30	10	0
RCR
0	77	77	77	77	66	66	66	45	45	45	0
1	70	67	64	61	60	57	55	39	38	36	0
2	64	58	54	50	54	50	46	34	32	30	0
3	58	51	46	41	49	44	39	30	27	25	0
4	53	45	39	34	45	38	34	26	23	21	0
5	48	40	34	29	41	34	29	23	20	18	0
6	44	35	29	25	37	30	25	21	17	15	0
7	41	31	26	21	34	27	22	18	15	13	0
8	37	28	22	19	32	24	19	17	13	11	0
9	35	25	20	16	29	22	17	15	12	10	0
10	32	23	18	14	27	20	15	14	11	9	0

Based on a floor reflectance of 0.2

SPECIFICATIONS

Housing:

6063 T5 extruded aluminum.

Optical system:

Constructed of highly specular aluminum, and highly reflective 24 ga. metal, to produce an indirect distribution.

Row ends:

1/4" aluminum end plate or mitered aluminum extrusion end caps.

Joints & Intersections:

All joints shall be accomplished usingQuickLock joining system. Optional connectors in "L", "T", or "X" configurations, shall be mitered aluminum extrusion.

Mounting:

Brackets attach to existing structure anywhere behind fixture. Fully adjustable mounting brackets to provide up to 1/8" wall variance and allow for vertical fixture leveling.

Electrical:

All luminaire sections shall be factory pre-wired to section ends. Optional quick connect plugs are available.

Ballast:

Electronic: rapid start, instant start or dimming.

Approvals:

Certified to UL & CSA standards.

Finish:

Thermosetting polyester, electrostatically applied meeting AAMA 603.8. Available in Ledalite standard white and in a full architectural spectrum of colors. Medium gloss finish as standard.

*Asymmetric effectiveness refers to the percentage of lamp lumens distributed on the room side of the luminaire, above 90 degrees.

Phone: 604-888-6811 Toll Free Fax: 1-800-665-LEDA (5332) Email: info@ledalite.com WWW: http://www.ledalite.com

Note: Specifications subject to change without notice.

Vector II - Page 19