1500 SERIES Pocket Door Frame Kit (cont'd)
5. Apply desired wall materials over the pocket side and above the door opening. Wall
materials are brought clear to the edges of the opening.
6. Seal all edges and face of door panel with choice of paint or sealing stain.
7. Fasten bumper on back edge of door, 40" from bottom edge.
8. Insert hanger wheels into track through space between end plate and track. Fasten
hanger plates in place.
9. Hold door in opening and slip pivot pin into slot in plate. Lock in place with locking
tab. Adjust hangers for height and plumb with jambs.
10. Use #1510, #1511 or #1512 jamb kit and install finished jambs, split header and casing
as shown. Fasten finish header on hanger locking or adjustment side with screws so future
door removal or hanger adjustments can be made easily.
11. Fasten #1550 Guides on finished split jambs at door
bottom do door is held in center of opening without binding.
12. Install #1521 Privacy Lock.
