Cutting Instructions - Johnson Hardware Pocket Door Frame Header

2'6" (76.2cm) and 3'0" (91.4cm) Universal Johnson Pocket Door Frames are marked for cutting to shorter lengths. See cutting instructions below.

1. Remove Adjustable End Bracket.

2. Cut through WOOD part of header only, on desired door size marking.

3. Turn Header over and cut Track 1 3/8" (35mm) shorter than wood header.

4. Replace Adjustable End Bracket on new cut end of header.

5. Turn Header on side and cut 3/4" (19mm) Head Trim Board ONLY at proper mark. Remove cut off end and discard.

6. Turn Header and cut off other side. 

Pocket Door Accessories For The Perfect Finishing Touch

P.O. Box 1126
Elkhart, IN 46515
Phone 1-219-293-5664