Factory Framed Boards & Accessories

As wall conditions require, installation is easily accomplished by using factory provided "L" brackets and screws. Wall anchors (not factory provided) should be used.

PARTIAL REPRESENTATION OF LEMCO VISUAL DISPLAY BOARDS.
A. Model #333 kings canyon tackboard with type 3 bronze anodized trim.
B. Model #254 silver screen gray markerboard with type 6 red oak trim.
C. Model #204 coral chalkboard with type 3 bronze anodized trim.
D. Model #254 white markerboard with type 5 satin anodized trim.
E. Model #204 green chalkboard with type 5 satin anodized trim.
F. Model #254 beige markerboard with type 3 bronze anodized trim.
G. Model #204 blue chalkboard with type 6 red oak trim.

ACCESSORIES
Maphook MH75-1 for 1" maprail or MH75-2 for 2". A combination hook and spring clip for holding papers.

Endstop ES70-1 for 1" maprail or ES70-2 for 2". Endstops are secured at each end of board after the maphooks, flagholders, etc. have been placed on the maprail.

Maphooks and endstops are included with each chalk or marker board ordered.

FLAGHOLDER FH73-1 for 1" maprail or FH73-2 for 2". Designed to hold flags with up to 3/8" diameter shaft.
MAPROLLERS MRB-1 for 1" maprail or MRB-2 for 2". Designed to hold pull down maps. Maprollers are ordered in pairs.

The above items are optional must be specified to be included.

MAPRAIL #58 1" OR #59 2" flush mount. Typically supplied for corridors, media centers or any place posters or papers are displayed. Maprail can be attached to any wall with screws. Order maphooks and endstops separately for this maprail. Lengths up to 24' long.

GRIP-A-STRIP PAPER HOLDERS STYLE S-2. Art work, maps, charts or other visual aids are held firmly by a system of interlocking rollers without tack, pins or tape. Papers are easily removed by pulling up and out. Stock sizes 2', 4' and 8'. Other sizes available by special order. This product can be specified in place of the standard maprail on chalk or marker boards. Colors available: Satin or Bronze.