PRODUCT PRESENTATION
GENERAL
These cabinets look like a piece of office furniture, but when opened are actually a
visual presentation board, flip chart, projection screen and/or bulletin board. Sensitive
information can be kept confidential, by simply closing the doors. EPB's ar also available
with locking doors. These units are designed for conference rooms, executive suites and
offices. Standard construction consists of hardwood or a aluminum frame with a markerboard
back panel and tackboard on the inside of the doors. However, any of Lemco chalk, marker,
visual plus or tackboard surfaces may be specified. Optional items include, pull down
projection screen, sketch pads, and locking doors.EPBW
WOOD FRAME
Executive Presentation Board by Lemco Inc. shall be MODEL EPBW with a solid hardwood
frame of red oak, walnut or mahogany. Finished in light, medium or dark stain and sealed
with a satin lacquer finish.
WRITING SURFACE: Markerboard shall be porcelain enamel on a
minimum of 28 gauge steel. Steel coil will properly pre-cleaned and treated. The porcelain
enamel finish will be type A or better. Both surfaces of steel will receive a ground coat
of porcelain enamel. A color cover coat of porcelain enamel will be applied to one surface
of the ground coat and fused to the steel sheet at a temperature of approximately 1500
degrees F.
CORE: Writing surface shall be laminated to core material of
1/4" industrial grade particle board.
BACKING: Core backing shall be tempered aluminum foil
.0015" thick
TACK SURFACE: Tack Surface shall be pure granulated natural
cork, (Lemco #320) laminated to the inside of the door.
INSTALLATION: Install with (2) 3/4" plywood french
cleats provided by the factory.
EPBAL ALUMINUM FRAME
Executive Presentation Board by Lemco Inc. shall be MODEL EPBAL with aluminum frame.
Laminate to be selected by the Architect will face outside of doors.
WRITING SURFACE: Markerboard shall be porcelain enamel on a
minimum of 28 gauge steel. Steel coil will properly be pre-cleaned and treated. The
porcelain enamel finish will be type A or better. Both surfaces of steel will receive a
ground coat of porcelain enamel. A color cover coat of porcelain enamel will be applied to
one surface of the ground coat and fused to the steel sheet at a temperature of
approximately 1500 degrees F.
CORE: Writing surface shall be laminated to core material of
7/16" industrial grade particle board.
BACKING: Core backing shall be tempered aluminum foil
.0015" thick
TACK SURFACE: Tack surface shall be pure granulated natural
cork, (Lemco #320) laminated to the inside of the door.
INSTALLATION: "L" bracket installation.
STANDARD SIZES FOR ALL EPB'S: 3'x4', 4'x4', 5'x4',& 6'x4'
PLEASE SPECIFY ANY OPTIONS AT TIME OF ORDER. |
