GENERAL
Lemco bulletin cases offer glass enclosures for displaying notices, posters, pictures, etc. Cases are manufactured with aluminum or solid wood (red oak) frames. They may be specified with hinged or sliding doors. Standard specification includes plate glass doors, #320 natural cork backing sheet and locking doors. Optional items are tempered glass, plexiglass and lights. The back surface of the case may be specified with any of Lemco chalk, marker or tackboard surfaces.

BCH ALUMINUM HINGED DOOR BULLETIN CASE
This hinged bulletin case frame is heavy gauge aluminum with an etched and satin anodized finish dark bronze is also available). Overall depth of the case is 3 1/2". The case may be modified for recessed installation by the addition of a 2" x 2" aluminum angle at the perimeter to cover the rough opening in the wall.

Hinged bulletin cases may be modified for exterior use by adding weather stripping to the doors and sealing the back of the unit against moisture.

The standard tackable surface inside the case is natural cork, however any of Lemco's tack surfaces may be specified. Changeable letter board is also available.

BCHW WOOD HINGED DOOR BULLETIN CASE
This hinged bulletin case frame is hardwood (red oak) in light medium or dark stain with a clear sealer. Overall depth of the case is 4". The case may recessed into the wall with edge molding to conceal the rough opening.

The standard tackable surface inside the case is natural cork, however any of Lemco's tack surfaces may be specified. Changeable letter board is also available.

Plate glass doors, 3/16" thick are standard.

BCS ALUMINUM SLIDING DOOR BULLETIN CASE
This sliding glass bulletin case frame is heavy gauge aluminum with an etched and satin anodized finish (dark bronze is also available). Overall depth of the case is 3 1/2". The case may be modified for recessed installation by the addition of a 2" x 2" aluminum angle at the perimeter to cover the rough opening in the wall.

Sliding bulletin cases are not recommended for exterior use.

The standard tackable surface inside the case is natural cork, however any of Lemco's tack surfaces may be specified. changeable letter board is also available.

Each sliding door has an aluminum "H" molding at the bottom, equipped with rollers and plastic guides at the top of the case to insure smooth operation. 1/4" plate glass doors are standard.

BCSW WOOD SLIDING DOOR BULLETIN CASE
This wood sliding glass case frame is hardwood (red oak) in light, medium or dark stain with a clear sealer. Overall depth of case is 4". The case may recessed into the wall with edge molding to conceal the rough opening.

The standard tackable surface inside the case is natural cork, however any of Lemco's tack surfaces may be specified. Changeable letter board is also available.

Each sliding door has an aluminum "H" molding at the bottom equipped with rollers and plastic guides at top of the case to insure smooth operation. 1/4" plate glass doors are standard.

NOTE: Tempered safety glass and plexiglass are optional at an extra cost.