TROPHY CASES
Lemco trophy cases are built to your specification. Because of the diverse trophy case
requirements, we invite design requests from architects and owners.MODEL TCR: RECESSED TROPHY CASE
APPLICATION: Model TCR recessed case for corridors or foyers. Built for easy
installation. Built with heavy duty plywood and 2" x 2" aluminum angle front
frame.
SPECIFICATION:
Materials: Recessed trophy case Lemco model TCR. Heavy duty plywood box of birch veneer
interior. All exposed aluminum trim shall be clear anodized aluminum 6063-T5. Doors shall
be 1/4" sliding glass with ground finger pulls and lock. Shelves are 1/4" glass
with polished edges. Each unit includes shelf standards, brackets and your choice of
tackable surface at the back wall of the case.
This case may be ordered as a front only for installation into a
wood box built by others. Model #TCR-F0.
TROPHY CASES |
FREE STANDING |
WALL MOUNT |
|
 |
|
MODEL TCW: WALL MOUNT TROPHY CASE
APPLICATION: Model TCW is a wall mount trophy case as shown. The TCW is constructed
with 1 1/2" tubular aluminum, 1/4" sliding glass doors, ground finger pulls and
locks. Shelves ar 1/4" glass with polished edges. All exposed aluminum shall be clear
anodized 6063-T5. Each unit includes shelf standards and brackets, and your choice of
tackable surface at the back wall of the case.
MODEL TCFS: FREE STANDING TROPHY CASE
APPLICATION: Model TCFS is a free standing case. The TCFS frame is constructed with
1 1/2" tubular aluminum, 1/4" sliding glass doors with ground finger pulls and
locks. Shelves are 1/4" glass with polished edges. All exposed aluminum shall be
clear anodized 6063-T5. Each unit includes shelf standards and brackets, and your choice
of tackable surface at the back wall of the case. If a enclosed base is desired order
Model TCFSB. The base is covered with plastic laminate selected by the architect.
GENERAL INFORMATION: Glass shelves are provided, two rows per
case. Recessed and surface mount units have either sliding or swinging doors. Free
standing units have sliding doors only. All units have locks. Sliding glass doors glide on
nylon rollers with plastic guides at top of the case.
Standard trim sections are extruded aluminum, etched and sealed with
a clear satin anodized finish. All sections of the TCWM and free standing units have
concealed aluminum channel or angle corner locks at all corners and connecting trim
sections. Standard construction consists of cork backing selected from any of Lemco's
standard types and colors, veneer faced top, bottom and side panels. Glass end panels in
all other models.
OPTIONS FOR TROPHY CASES:
- Tempered glass doors and shelves (recommended for any public
building).
- Fluorescent Lights
- Bronze anodized trim.
- Hinged doors.
|
