architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Lighting & Electronics Inc.   Light & Electronics  

Light & Electronics Products - Page 8

   

Light & Electronics

LIGHTING & ELECTRONICS, INC

Market Street Industrial Park Wappingers Falls, NY 12590

914-297-1244 FAX 914-297-9270

R40 Border
65-16
-76, -26, -36

 

Height (top to bottom) 9-9/16""
Width (side to side) 7"
#65-16 6' 12 light 47 lb
#65-76 7-1/2' 15 light 54 lb
#65-26 8' 16 light 57 lb
#65-36 Continuous apprx 7 lb/ft
Color frame 5-3/4" x 5-3/4"

ILLUMINATION:

SPREAD

Lamp CBCP Field ° mf HRS
Q250PAR38/SP 28,000 24 0.43 6000
Q250PAR38/FL 6,500 35 0.63 6000
250KR38/SP 14,200 35 0.63 4000
250KR28/FL 6,100 60 1.15 4000
150PAR38/SP 11,000 30 0.54 2000
150PAR38/FL 3,600 60 1.15 2000
300R/SP 14,000 40 0.73 2000
300R/FL 2,900 120 3.46 2000
150R/SP 7,000 37 0.67 2000
150R/FL 1,300 110 2.86 2000

To find fight output in footcandfes (fc) at any distance;

CBCP/(throw distance)2 = fc

To find any beam diameter at any distance;

throw distance x mf = beam dia.

SPECIFICATION

The luminaire shall be a UL/C - UL Listed 2400 watt per circuit, compartmented borderlight with medium screw sockets on 6" centers, to accept 150w to 300w R40 lamps. The unit shall be constructed of all welded code gauge steel with cast aluminum end plates. The fixture shall be equipped with color frame holders with a spring- hinged retaining clip on the top to prevent accidental removal and allow for operation in any position.

Relamping shall be accomplished from the front of the unit by unscrewing the lamp from the socket. Relamping is completed without disturbing prefocused alignment.

The luminaire shall be supplied with two 16 gauge single mount trunnion for overhead or floor use, combo color frames to accept glass or plastic color media, and three foot, three wire leads encased in fiberglass sleeving in three or four circuit configurations. The continuous version shall be supplied with a wiring compartment for permanent connection with the specified number of circuits, combo color frames, and hanging hardware.

All painted surfaces of the fixture shall be baked enamel.

Copyright © 1996 Lighting & Electronics, Inc.



Request for Information / Request a Catalog from Lighting & Electronics Inc.
 
 
 
To request more information from Lighting & Electronics Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.