architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Lighting & Electronics Inc.   Light & Electronics  

Light & Electronics Products - Page 13

   

Light & Electronics

CYCLIGHTS

Broad Cyc™

300w/500w, 750w/1000w, 1500w/2000w

#65-71 /1 light

#65-71/1 1 light #65-71/2 2 light #65-71/3 3 light #65-71/4 4 light
Height (Top to bottom)
10-1/4" 10-1/4" 10-1/4" 21"
Width (Side to side)
11-7/8" 23- 3/4" 35-5/8" 23- 3/4"
Depth (Front to back)
8" 8" 8" 14"
Weight
11 Ibs. 23 Ibs. 34 Ibs. 48 Ibs.

INCLUSIONS

  • Color frame
  • Three foot, 3 wire leads

ACCESSORIES

  • Floor trunnion

ILLUMINATION

Horizontal beam angle 72° (1.45mf)
Horizontal field angle 95°(2.18mf)
300w Lumens mf 1000w Lumens mf
EHM 6000 .23 FCM 27500 1.06
EHZ* 5700 .22 FHM* 26000 1.00
500w FFT 26400 1.02
FDF 13250 .51 1500w
FDN* 12500 .48 FDB 41200 1.58
FCL 10000 .38 FGT* 40200 1.55
FCZ* 9300 .36 2000w
750w FFW 57000 2.19
EJG 20000 .77
EMD* 19500 .75 Vertical angle

of coverage 86°
* Inside Frosted

SPECIFICATIONS

The luminaire shall be a UL approved 300 to 2000 watt cyclight with two recessed single contact sockets, to accept a double ended lamp, housed in a 24 gauge patterned aluminum reflector. The fixture shall be a one light unit capable of being configured, in the field, with multiple lights. The body shall be constructed of all welded code gauge steel. Color frame holders shall be made of four steel clips on the top and bottom. All ventilating holes shall be baffled to minimize light leaks.

Relamping shall be accomplished from the front of the unit by applying outward pressure to the sockets and removing the lamp. Relamping will be completed without disturbing the prefocused lamp alignment. Conversion from FHM to FFT type lamps shall be accomplished without disassembling the unit. The socket brackets shall loosen and reposition to accommodate either lamp type.

The fixtures shall be supplied with a yoke, color frame, and a three foot, three wire lead encased in fiberglass sleeving.

All painted surfaces of the fixture shall be baked enamel.



Request for Information / Request a Catalog from Lighting & Electronics Inc.
 
 
 
To request more information from Lighting & Electronics Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.