200w/500w/650w/750w (Per Circuit)

Height (Toptobottom): 51/2"

Depth (Front to back): 5"

INCLUSIONS

• Color frame
• Trunnion
• Three foot, 3 wire leads

ACCESSORIES

• Piggyback trunnion
• Sideways trunnion

ILLUMINATION

SPECIFICATIONS

The luminaire shall be a UL approved 200 to 750 watt per circuit mini-striplight with rim mount lamp holders, to accept 12 voit MR16 lamps of 20, 50, 65 or 75 watts. The unit shall be wired with series circuits of 10 tamps each. Front mounted neon indicator lamps shall be wired in parallel with the lamps to indicate lamp failure and to allow for quick relamping. The fixture shall be constructed of all welded code gauge steel. The unit shall be equipped with double color frame holders with a spring-hinged retaining clip on the top to prevent accidental removal.

Relamping shali be accomplished from the top of the fixture by releasing the tension latches on the lamp access door and raising the lamp ejection lever. Relamping shall be completed without disturbing the prefocused lamp alignment.

Lamp repositioning shall be accomplished by loosening the socket mounting strip screws and moving the mounting strip to the desired location.

The luminaire shall be supplied with two 16 gauge steel single mount trunnion for overhead or floor use, color frames and three foot, three wire leads encased in black fiberglass sleeving.

All painted surfaces of the fixture shall be baked enamel.