LIGHTWEIGHT FLOODLIGHTS

14" Scoop 1000/1500w

INCLUSIONS

• Color frame
• Three foot, 3 wire lead

ILLUMINATION SPREAD

ie. if your fixture is 10' from the subject to be lit, the beam diameter would be:
beam angle 10' x 1.83 =18'
field angle 10' x 3.84 = 38'

INTENSITY

ie. if your fixture is 10' from the subject to be lit, and lamped with a DSP lamp the footcandle output would be: 5.400/100-54 fc (10 x 10 = 100)

NOTE: The BEAM ANGLE and FIELD ANGLE are both factors that determine a BEAM SPREAD. BEAM ANGLE determines a spread whose intensities at its edges are 50% of its center intensity. FIELD ANGLE determines a spread whose intensities at its edges are 10% of its center intensity.

mf = multiplying factor CBCP = Center Beam Candle Power *denotes incandescent lamp

To find beam diameter at any distance: throw distance x mf = beam diameter To find light output in footcandles (fc) at any distance: CBCP / (throw distance)² = fc

SPECIFICATIONS

The luminaire shall be a UL approved 1000 to 1500 watt, 14" elliptical reflector floodlight with a mogul screw base socket, to accept a mogul base lamp, housed inside an aluminum reflector. The socket housing shall be cast aluminum and ribbed for cooler operation. The fixture shall have a steel color frame holder on two sides and the bottom which allows for 360 degree rotation.

Relamping shall be accomplished from the front of the unit without disturbing the prefocused alignment. The luminaire shall be supplied with a rigid strap yoke, color frame and a three foot, three wire lead encased in black fiberglass sleeving.

The exterior finish shall be baked enamel.