architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Lighting & Electronics Inc.   Light & Electronics  

Light & Electronics Products - Page 22

   

Light & Electronics

Cranny Fill Light

300/500/750/100w

#63-60 Weight 2 Ibs.
Height (Top to Bottom): 4-1/4"
Width (Side to side): 9"
Length (Front to back): 1-7/8"

INCLUSIONS

  • Three foot, 3 wire lead

ACCESSORIES

  • 4 way barn door
  • Color frame
  • Color frame holder
  • Softlight hood

ILLUMINATION

SPREAD

Focus Horizontal: Angle (softlight in parentheses) mf
Beam (50% CBCP) 83° (70°) 1.77 (1.40)
Field (10% CBCP) 121° 3.54
Vertical:    
Beam (50% CBCP) 86° (70°) 1.86 (1.40)
Field (10% CBCP) 115° 3.14

ie. if your fixture is 24' from the subject to be lit, the beam diameter would be:

beam angle 24' x 1.3=31'
field angle 24' x 2.7 = 64'

INTENSITY

300W CBCP
(softlight in parentheses)		 Color Temp(°K) Hrs
EHM 4230(1,565) 3000 2000
EHZ* 4,050 (1,500) 3000 2000
500w
FDF 9,400 (3,475) 3200 400
FDN* 8,840 (3,270) 3200 400
750w
EJG 14,170(5,240) 3200 400
EMD* 13,800(5,100) 3200 400
l000w
FCM 19,500 (7,200) 3200 400
FHM* 18,400 (6,800) 3200 400
650w (with intergral socket spacing adjustment)
FAD 14,255(5,275) 3200 100
DWZ (30V-375w) 5,600 (1 ,595) 2950 1500
* indicates frosted lamp

NOTE: The BEAM ANGLE and FIELD ANGLE are both factors that determine a BEAM SPREAD. BEAM ANGLE determines a spread whose intensifies at its edges are 50% of its center intensity. FIELD ANGLE determines a spread whose intensities at its edges are 10% of its center intensity.

mf = multiplying factor CBCP = Center Beam Candle Power * denotes incandescent lamp To find beam diameter at any distance; throw distance x mf = beam diameter To find light output in footcandles (fc) at any distance; CBCP / (throw distance)2 = fc

SPECIFICATIONS

The luminaire shall be a 300 to 1000 watt reflector floodlight with one pair of recessed single contact sockets, to accept double ended, 4-11/l6"mol and 3-1l/8"mol tubular lamps. Reflectors shall be of a highly reflective 24 ga. patterned aluminum. The fixture shall be constructed of an all welded steel housing with removable covers. The unit shall allow the quick adjustment of the socket spacing to permit the use of both the 4-11/16"mol (FHM), and 3-/8" mol (FAD) series of lamps. Socket adjustment shall not require any disassembly of the unit or alter the pre-focused lamp/reflector alignment. The unit shall be equipped with two pairs of mounting screws to allow the easy installation of accessories without requiring any disassembly.

Relamping shall be accomplished from the front without disturbing the prefocused lamp setting.

The instrument shall be supplied with a rigid strap yoke and a three foot. three wire lead encased in black fiberglass i sleeving.

The finish of the unit shall be of a baked enamel.



Request for Information / Request a Catalog from Lighting & Electronics Inc.
 
 
 
To request more information from Lighting & Electronics Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.