200w

INCLUSIONS

• Color Holder
• Three Foot, 3-Wire Lead
• Mounting Bracket

Copyright ^© 1996 Lighting & Electronics, Inc.

ILLUMINATION SPREAD

INTENSITY

** indicates frosted lamp

To find light output in footcandies (fc) at any distance: CBCP / (throw distance)² = fc

To find any beam diameter at any distance: throw distance x mf = beam diameter

SPECIFICATIONS

The luminaire shall be a UL approved 200 watt floodlight with a double contact bayonet socket to accept tungsten halogen lamps in a 120 volt environment. The socket shall be mounted on a rigid bracket in front of a patterned, clear anodized reflector assembly. The 20GA steel housing shall be constructed for maximum durability while allowing easy access for periodic maintenance. Threaded receptacles shall be strategically located to allow varied mounting techniques and accessory use. Ventilation shall be designed to minimize light leaks while delivering maximum air flow. The fixture shall operate cool enough not to require "intense heat" labeling by UL.

Relamping shall be accomplished through the front of the housing. Relamping shall be accomplished without disturbing the prefocused lamp setting.

The instrument shall be supplied with a mounting bracket, and a three foot, three wire lead in fiberglass sleeving.

The finish shall be a baked enamel.