The Lite Touch rough-in enclosures will accommodate two or four LiteTouch modules. In accordance with UL and CSA requirements, the interior space is barriered to isolate line and low voltage sections. The most suitable locations for enclosure placement are near the breaker panel feeding the modules or wherever the load runs can be minimized. LiteTouch enclosures should be located in an environment where ambient temperatures do not exceed 95° F (35° C). Modules may create some audible noise and should not be located where this would be objectionable. Two enclosure types are available – surface and recess mount. The surface mount unit’s metal door is mounted flush with the edges of the enclosure. The recessed mount unit’s metal door overlaps the enclosure by 1" on all four sides (to cover up the rough-in work). Both doors are hinged on the left side.

Technical Support Line: 1-800-527-5527