Eliminate unsightly wall cutter with distinctive LiteTouch Control Stations. LiteTouch Control Stations can take the place of wallbox dimmers, toggle switches, drapery or motorized load controls, etc. Control Stations connect in parallel and have their own selectable address for communication with the CCU. This concept allows simple wiring while preserving total flexibility. It is possible to independently assign any control station switch to control any load. Any given load can be controlled from several different control stations, or any switch can be assigned to simultaneously; control many loads (a master mode).

Control Stations are available from one to nine switches in a single gang (E-series one to four switches). Multiple gang Control Stations are also available (from two to eight gangs). LiteTouch can custom punch multiple gangs to include A/V, security, HVAC controls, etc. The switches have integrated LEDs for indicating load or scene status. Each station is equipped with a night light switch that can be turned on or off at the station. When activated the homeowner is able to locate the station in a dark room. When the loads are not in use the LEDs glow with a 5 percent intensity. When pressed the active LEDs are lit at 100 percent intensity.

Control Stations are available in both framed and sculpted styles (E-series available in sculpted only). Framed stations have a bezel that surrounds the exterior of the station. Sculpted stations are a single faceplate piece that curves back toward the wall providing a seamless look.

Engraving is available on each button. The S-series and E-series allows up to 2 lines with eight letters per line. The H-series can be engraved with up to 10 letters on a single line. Icons (customs symbols), Braille, and some foreign languages are also available.

Infrared handheld remotes are available for across-the-room wireless operation of Control Stations with infrared sensors. The infrared sensor is always located in position number 9 on the S-series and H-series stations. A remote IR sensor option is available for all three stations series.

Technical Support Line: 1-800-527-5527