|
Catalog Numbers
S-Series - Single Gang Stations
| Framed |
Sculpted |
No. of Switches |
| 08-2701-XXXX* |
08-2501 -XXXX* |
1 |
| 08-2702-XXXX* |
08-2502 -XXXX* |
2 |
| 08-2703-XXXX* |
08-2503 -XXXX* |
3 |
| 08-2704-XXXX* |
08-2504 -XXXX* |
4 |
| 08-2705-XXXX* |
08-2505 -XXXX* |
5 |
| 08-2706-XXXX* |
08-2506 -XXXX* |
6 |
| 08-2707-XXXX* |
08-2507-XXXX* |
7 |
| 08-2708-XXXX* |
08-2508-XXXX* |
8 |
| 08-2709-XXXX* |
08-2509*-XXXX* |
9 |
H-series - Single Gang Stations
| Framed |
Sculpted |
No. of Switches |
| 08-2801-XXXX* |
08-2901-XXXX* |
1 |
| 08-2802-XXXX* |
08-2902-XXXX* |
2 |
| 08-2803-XXXX* |
08-2903-XXXX* |
3 |
| 08-2804-XXXX* |
08-2904-XXXX* |
4 |
| 08-2805-XXXX* |
08-2905-XXXX* |
5 |
| 08-2806-XXXX* |
08-2906-XXXX* |
6 |
| 08-2807-XXXX* |
08-2907-XXXX* |
7 |
| 08-2808-XXXX* |
08-2908-XXXX* |
8 |
| 08-2809-XXXX* |
08-2909-XXXX* |
9 |
Catalog Numbers
E-series-Single Gang Stations
| Framed |
Sculpted |
No. of Switches |
| Not Available |
08-2401-XXX |
1 |
| Not Available |
08-2402-XXX |
2 |
| Not Available |
08-2403-XXX |
3 |
| Not Available |
08-2404-XXX |
4 |
E-series - Double Gang Stations
| Framed |
Sculpted |
No. of Switches |
| Not Available |
08-2405-XXX |
5 |
| Not Available |
08-2406-XXX |
6 |
| Not Available |
08-2407-XXX |
7 |
| Not Available |
08-2408-XXX |
8 |
* Four digit suffix code indicates the
combination of faceplate finish, bezel finish, and button color. The forth "X"
indicates with or without infrared. "I" indicates with infrared. "X"
indicates no infrared. (Infrared is always in position #9).
08-2800-01
: Infrared Sensor (for IR wireless remote operation)
08-2103-XXXX : LiteTouch Control Station wire
Faceplate Colors: A-Primecoat, B - Gray
Anodized, C-Black Anodized, D- Polished Stainless, E - Satin Stainless, K - Satin Gold
Anodized, W - White, V - Ivory.
Premium Colors: H - Polished Gold, I - Satin
Gold, J - Oil Rubbed Bronze, Bezel Color: 1 - Primecoat, 2 - Black, 3 - Stainless, 4 -
Gold, 5 - Antique Gold
Engineering Data
Supply Voltage |
12-20 VDC |
| Supply Current |
10 mA (no LEDs lit) |
|
100 mA (9 LEDs lit) nominal |
|
(Up to 35 Control Stations may be powered
from one |
|
Power Supply Module in a typical
configuration) |
| Wiring to CCU |
Two 18 gauge and one 16 gauge |
|
(or three 16 gauge) |
| Address Combinations |
256 |
| Ambient Operating Temperatures |
Min.32° F(0° C). Max. 100° F(38° C) |
| Framed & Sculpted Internal Dimensions |
3"H x 2"W x 1 3/8" D |
| Framed External Dimensions |
4 5/8"H x 2 13/16"W x
1/8"D |
Sculpted External
Dimensions |
4 5/8"
H x 2 13/16" W x 1/8"D |
Sculpted External
Dimensions |
4 5/8"
H x 2 13/16" W x 1/8"D |
H-series Buttons |
3/16"H x 11/16"W,
protrudes 1/16" from faceplate |
S-series Buttons |
7/16"H x 7/16"W,
protrudes 1/16" from faceplate |
|
(Note: The LED is located
above the button on the faceplate) |
E-series Buttons |
23/32"H x
23/32", protrudes 1/16" from faceplate |
|
(Note: The LED is located above the button
on the faceplate) |
|
Installation note: Use square-cornered,
standard size back boxes to accommodate the inside dimensions of the control stations. Do
not use plaster rings) |
Programmable Switch Functions
Control Station switches can be programmed at the CCU
to perform one of many possible functions. The available switch modes include the
following:
Toggle |
Scene Presets |
Timed Toggle |
ELITE ONLY |
Dimming |
Scene Toggle |
Timed Flashing Interval |
Conditional |
On Master |
Raise |
Momentary On Operation |
Sequential |
Off Master |
Lower |
Dimming Master |
Combination Locks |
Toggle Master |
Timed Interval |
Open/Close |
Sequence Pause |
|
|
|
Switch Pointer |
|
|
|
Motion Control |
3550 South 700 West • Salt Lake City, Utah 84119
• (801) 268-8668 • Fax: (801) 268-9200
Technical Support Line: 1-800-527-5527 |
LiteTouch, Inc.