TS and TP SERIES Turret Industrial

TS - Baked white enamel reflector
TP - Porcelain reflector

* For 277 volt, substitute '4'
** Bulk-Pack: Fixtures packed in individual cartons, Reflectors bulk-packed in separate cartons. For complete fixture packed in individual carton, substitute 'U'.

LAMPS:

40 - F40T12   34 watt ES

32 - FO32T8  32 watt

48 - F48T12   38 watt Slimline,

60 watt HO, 110 watt VHO/SHO, or T17 110 watt PowerGroove

59 - FO59T8  59 watt

86 - F96T8     86 watt HO

96 - F96T12   75 watt Slimline,
110 watt HO, 215 watt VHO/SHO, or T17 215 watt PowerGroove

BALLASTS:

BE - 430 ma Rapid Start Energy Saving

ET - 430 ma Electronic

CT - 430 ma Electronic (3 lamp)

OT - 265 ma Magnetic Octron

EO - 265 ma Electronic Octron

CO - 265 ma Electronic Octron (3 or 4 lamp)

JA - 425 ma Slimline

JE - 425 ma Energy Saving SL

JT - 425 ma Electronic SL

KA - 800 ma High Output

KC - 800 ma High Output - 20°

KE - 800 ma Energy Saving HO

KT - 800 ma Electronic HO

TA - 1500 ma VHO/SHO/PG

Note: On 3 or 4 lamp electronic fixtures, CT  and CO designate a single 3 or 4 lamp ballast in fixture; ET and EO designate 2 ballasts in fixture, with inboard lamp(s) wired separately.

OPTIONS:

Use the following suffix:

- F1     Fusing, one per fixture

- RF1   Radio Interference Filter, one per fixture

Emergency Ballasts - please consult options page for complete listing.

Pre-wired quick-connect system for laborsaving continuous row installation. 120 or 277 volt, max. 20 amp load on circuits.

- MNL2   Single circuit, 1 unit 2 wire (Others available - Consult Factory)

Dimming Ballasts (Select models - Consult Factory)

BA - Reflector; 20% uplight apertured

BS - Reflector; solid

Slide hanger (SG) available for grooved housing.

ACCESSORIES:

Reflector aligners for continuous row mounting.

Stems & Canopy - Consult options page.

Shipped separately and field-installed.

2179P    Standard Channel Hanger for RS, SL fixtures, flush to T-bar ceiling.

2180P    1.5" Spacer Channel Hanger for RS, SL fixtures.

2182P    1.5" Spacer Channel Hanger for 800 & 1500 ma fixtures.

JC - Jack Chain Kit

(Note: 800 & 1500 ma fixtures not suitable for flush surface mounting; use spacer hanger or other method.)

For complete listing and descriptions, refer to OPTIONS & ACCESSORIES catalog section.

Specifications and dimensional data subject to change without notice.

No. shown indicates Mounting/Knockout Diagram - See Options & Accessories section of catalog.

Catalog Number: TS24048 - BE1- BA

Lamps: Two F4012 Each Rated at 3150 Lumens

Total Luminaire Efficiency = 92.7%

Lumax Industries, Inc.

TR697