| LAMPS: |
| 40 - F40T12 40 watt |
| 32 - FO32 T8 32 watt |
| 48 - F48 |
| T12 38 watt Slimline, 60 watt HO, 110 watt
VHO/SHO, or T17 110 watt PowerGroove |
| 59 - F059 T8 59 watt |
| 86 - F086 T8 86 watt |
| 96 - F96 |
| T12 75 watt Slimline, 110 watt HO, 215
watt VHO/SHO, or T17 215 watt PowerGroove |
| BALLASTS: |
| BE - 430 ma Rapid Start Energy Saving |
| ET - 430 ma Electronic |
| OT - 265 ma Magnetic Octron |
| EO - 265 ma Electronic Octron |
| CO - 265 ma Electronic Octron (3 or 4
lamps) |
| JA - 425 ma Slimline |
| JE - 425 ma Energy Saving SL |
| JC - 425 ma Slimline CW (0°) |
| JT - 425 ma Electronic SL |
| KA - 800 ma High Output |
| KE - 800 ma Energy Saving HO |
| KT - 800 ma Electronic HO |
| TA - 1500 ma VHO/SHO/PG |
| Note: On 3 or 4 lamp electronic fixtures,
CO designates a single 3 or 4 lamp ballast in fixture. ET and EO designate 2 ballasts
in fixture, with inboard lamp(s) wired separately. |
| OPTIONS: |
| Use the following suffix for: |
| - F1 Fusing, one per fixture |
| -F2 Fusing, one per ballast |
| - RF1 Radio Interference Filter, one per
fixture |
| - XP Extended End Plates for socket
protection |
| Pre-wired quick-connect system for
labor-saving continuous row installation. 120 or 277 volt, max. 20 amp load on circuits. |
| -MNL 2 Single circuit, 1 unit 2 wire
(Other available - Consult Factory) |
| 2 - lamp 10" wide models available -
Consult Factory |
| Emergency Ballast - Please consult options
page for complete listings. |
| Dimming Ballast - Please consult the
Factory. |
| ACCESSORIES: |
| Shipped separately and field - installed. |
| RE48 Asymmetric Reflector, 48" length |
| RE96 As above.2 - 48" length
Symmetric Reflector: order qty. for both sides of fixture |
| CS-WG48 Wire Guard for naoorw housing,
48" length, plated steel (Order qty, req'd per fixture) |
| CD-WG48 As above, for wide housing |
| 2181P Standard Channel Hanger for narrow
housing, flush to T-bar ceiling. |
| 2182P 1.5" Spacer Channel Hanger for
narrow housing. |
| (Note: 800 & 1500 ma fixtures not suitable
for flush surface mounting; use spacer hanger or other method.) For complete listing and
descriptions, refer to OPTIONS & ACCESSORIES catalog section. |
| * For 277 volt, substitute '4' |
| ** Fixtures packed in individual cartons.
For Bulk Pack, substitute 'B' |
