architecture - engineering - construction
Lumax Industries Inc.
Vandal Security
Vandal Security - Page 15
Vandal Security
| VANDALYTE
SERIES 8 & 12 Vandal
Resistant Lighting |
|
| Catalog Number : VL10012-MH1P Clear Prismatic Lens
Lamp: One 100 watt Metal Halide |
Catalog Number: VL15012-SH1P Clear Prismatic Lens
Lamp: One 150 watt
High Pressure Sodium |
| Ceiling Mounted 8 ft. MH |
Ceiling Mounted 8 ft. MH |
 |
 |
Height Conversion Factors
Adjust Footcandle levels shown by using height conversion factors listed below.
FC x HCF = FC at alternate height |
| MH |
7 ft. |
9 ft. |
10 ft. |
12 ft. |
| HCF |
1.3 |
.79 |
.64 |
.44 |
Height Conversion Factors
Adjust Footcandle levels shown by using height conversion factors listed below.
FC x HCF = FC at alternate height |
| MH |
7 ft. |
9 ft. |
10 ft. |
12 ft. |
| HCF |
1.3 |
.79 |
.64 |
.44 |
| LAMPS: |
| 35 - 35 watt High Pressure Sodium |
| 50 - 50 watt HPS |
| 70 - 70 watt HPS or Metal Halide |
| 100 - 100 watt HPS or Metal Halide |
| 150 - 150 watt HPS or Metal Halide |
| 175 - 175 watt Metal Halide |
| BALLASTS: |
| SH - High Power Factor HPS, Min. Starting
Temp. -40° F. |
| MH - High Power Factor Metal Halide, Min.
Starting Temp. -20° F. |
| LENS: |
| P - Polycarbonate Injection-molded Clear
Prismatic Lens is standard. |
| W - As above, in White. |
| OPTIONS: |
| Use the follwoing suffix for: |
| AL - Aluminum Reflector/Mounting Plate,
white powder coat finish |
| HR - Specular Aluminum Internal Hood/
Reflector for high angle light cut-off |
| MS - Maximum Security Lens Option -
additional drill holes and tamper-resistant screws |
| MG - Neoprene 4" Sq. Gasket for
surface mounting to junction box |
| ACCESSORIES: |
| WB8 Wall Bracket, two piece steel, dark
bronze finish, for Series 8 |
| WB12 As above, for Series 12 |
| TS Screwdriver for tamper resistant screws |
| PC1 Photocontrol |
| |
| SERIES 8 HID |
SERIES 12 HID |
 |
 |
 |
| LUMAX INDUSTREIS, INC.
Vandalyte - 8 & 12. |
|
