Homepage  
Search
find:
search for:
   
 
Site Navigation
News / Publications
Jobs
Service
   Add this page to Google Bookmarks
   Add this page to Mister Wong
   Add this page to del.icio.us
 
   Mar-Mac Manufacturing Co., Inc.  MacWrap  

MacWrap Page - 4

 

 

MacWrap

Sample Specification

All pipe joints shall be installed with an exterior joint collar. The joint collar shall be MacWrap Exterior Joint Sealer as manufactured by Mar-Mac Manufacturing Company or an approved equal and shall be installed according to the manufacturer's recommendations. The collar shall consist of a band (*)" wide. The band shall have an outer layer of polyethylene with an under layer of rubberized mastic that is reinforced with a woven polypropylene fabric. There shall be a peelable protective paper against the mastic that is removed when the collar is applied to the joint. Within the collar two steel straps 5/8" wide shall be located 3/4" from each edge of the band. The straps shall be in tubes that isolate them from the mastic and allow them to slip freely when tightened around the pipe. The collar shall be designed so that when it is applied around the joint the ends shall overlap at least 6" and when the straps are secured a layer shall completely cover the straps protecting them from moisture and rust. A bell hole shall be dug under the joint. After removing the protective paper, the band shall be placed around the pipe, mastic side to the pipe and spanning the joint, with the overlap at the top of the pipe. The steel straps shall be secured with the proper tools. The closing flap shall cover all remaining exposed strap.

*9" width is usually wide enough for pipe with smooth outside walls in diameters up through 48" I.D. 9" width normally is sufficient for all smooth outside wall pipe. 9" and 13" widths are used on pipe with modified bell or full bell joints depending on pipe and bell size.

MacWrap

MacWrap


Other quality products for the construction industry by Mar-Mac Manufacturing Company:

  • Mar-Mac Diapers, forms for grouting pipe joints
  • Tie wires for tying re-bars and concrete forms
  • Wire insulation supports
Mar-Mac Mar-Mac also manufactures complete lines of Wire and Wire Products and Protective Clothing. Call for more information.
MAR-MAC MANUFACTURING CO., INC.
P.O. Box 278, McBee, South Carolina 29101
Telephone 843/335-8211 Fax 843/335-8599
http://www.marmac.com/

Toll Free Free 845-6962 (except S.C.)

*Request for Information / Request a Catalog
 
 
 
To request more information from Mar-Mac Manufacturing Co., Inc., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Company type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free bi-monthly AECnews e-Newsletter.  
     






Printable version Bookmark this page Notify a colleague or friend about this pageHome | Terms of Use | Privacy Statement | Link to AECinfo
AECinfo is a member of Docu Group, the world's largest building products information network.



Copyright © 1996-2008 AECinfo.com