| |
60 Minute |
90 Minute |
Maximum Size |
4/0 x 9/0
Warnock Hersey Label* 4/0 x 8/0 UL Label |
4/0 x 9/0
Warnock Hersey Label* 4/0 x 8/0 UL Label |
Thickness |
1-3/4" |
1-3/4" |
Core |
Non-combustible,
non-asbestos mineral core. Engineered to meet labeling requirements. All mineral core
doors are manufactured with a standard PC-7 edgebonded construction. |
Non-combustible,
non-asbestos mineral core. Engineered to meet labeling requirements. All mineral core
doors are manufactured with a standard PC-7 edgebonded construction. |
Stiles |
Inner banding
1" thick G.P. Firestop with a 1/4" maximum wood outer laminate prior to
Trimming. Standard outer ply is typically fir. Matching edge by request. Direct Screw
Withdraw - 1130.4 lbs. (average). |
Inner banding
1" thick G.P. Firestop with a 1/4" maximum wood outer laminate prior to
Trimming. Standard outer ply is typically fir. Matching edge by request. Direct Screw
Withdraw - 1130.4 lbs. (average). |
Rails |
2" Top and
Bottom Rail-Standard. All dimensions are prior to factory trimming. 5" top and bottom
rails and cross rails available by special request. |
2" Top and
Bottom Rail-Standard. All dimensions are prior to factory trimming. 5" top and bottom
rails and cross rails available by special request. |
Lockblocks |
5" x
18" lockblock by special request. |
5" x
18" lockblock by special request. |
Adhesive |
Polyvinyl
Acetate Type II Water Resistant-Standard. Type I Waterproof by special request. |
Polyvinyl
Acetate Type II Water Resistant-Standard. Type I Waterproof by special request. |
Maximum Lite Opening |
Standard
1/4" Wire Glass - 100 square inches. Maximum Width 10" Maximum Height 33"
Special Firelite Glass-1296 square inches. Maximum Width 35" Maximum Height 77" |
Standard
1/4" Wire Glass - 100 square inches. Maximum Width 10" Maximum Height 33"
Special Firelite Glass-1080 square inches. Maximum Width 36" Maximum Height 47" |
Metal Edge & Astragals |
Available in 18
and 20 gauge metal, minimum Overlap of 1". Must be attached with a minimum #8 screw,
on center, 4" from cutouts. Astragal machining available by special request. For an
additional cost 2" Firestop stiles on the meeting edges can be specified eliminating
the need for metal edges and astragals. |
Available in 18
and 20 gauge metal, minimum Overlap of 1". Must be attached with a minimum #8 screw,
on center, 4" from cutouts. Astragal machining available by special request. For an
additional cost 2" Firestop stiles on the meeting edges can be specified eliminating
the need for metal edges and astragals. |
Kedex Surfaces |
Used for
kickplates, armor plates, edges, or full surface. Kydex maintains 10X the impact and
durability of standard plastic laminate. Available in hundreds of colors. |
Used for
kickplates, armor plates, edges, or full surface. Kydex maintains 10X the impact and
durability of standard plastic laminate. Available in hundreds of colors. |
Applied Moldings |
Six (6)
standard profiles, Custom profiles by request. Profile maximum width 1-1/2" x
3/4" height. |
Six (6)
standard profiles, Custom profiles by request. Profile maximum width 1-1/2" x
3/4" height. |
Labeling Services |
Underwriters
& Warnock Hersy |
Underwriters
& Warnock Hersy |
Guarantee |
One (5) year
standard. Lifetime available. |
Five (5) year
standard. Lifetime available. |
Pairs & Double Egress |
Pairs only
Warnock Hersey label. Maximum Size 8/0 x 8/0. |
Pairs and
double egress Warnock Hersey label. Maximum size 8/0 x 8/0. |
Transoms |
Stationary or
rabbeted, maximum width 4/0 x 3/0 height. Single swing locations only. Available in
running, continuous, & end matched. |
Stationary or
rabbeted, maximum width 4/0 x 3/0 height. Single swing locations only. Available in
running, continuous, & end matched. |
Louvers |
Must be fusible
link type. Must be a minimum of 10" from the door bottom and 6" from any edge or
hardware cutout. Maximum height/width 24". |
Must be fusible
link type. Must be a minimum of 10" from the door bottom and 6" from any edge or
hardware cutout. Maximum height/width 24". |
Harware |
Hinges
- 4-1/2" x 4-1/2" x .134 min. butt or listed continous hinge. Doors under 3/0 x
7/0 4" x .105 butt or spring hinges. Latching Devices - Cylindrical, mortise,
unit, surface vertical rods, rim exit devices, and cylinder dead bolts (in combination
with approved latching device). Closers - Surface mounted, concealed overhead
stops. (Some restrictions apply-consult factory.) Viewers - One 1" diameter hole or
two 1/2" diameter holes. Kickplates - Plates of brass, bronze, steel,
aluminium, or polycarbonate up to 16 standard. For sizes 16" - 48" Firestop
blocking must be installed for an additional cost. Automatic Door Bottoms - Yes.
Consult factory for approved devices. |
