| Mohawk Flush Door Specifications Mohawk Particle Core Door
MFPC - Drop-in or loose lay-up
MPC - Stiles and rails securely bonded to
core
Door shown has a Plain Sliced Walnut
Clear 2000 finish.
APPLICATIONS: MFPC-Used
in high-traffic areas commercial in nature. MPC-Used in high-traffic areas when AWI 1300
Specifications must be met, architectural in nature.
MAXIMUM SIZE: 4/0 X
10/0.
Thickness: 1-3/8"
and 1-3/4" standard. Other thickness by special request.
FACES: Standard 3-ply
wood veneer of all grades approximately 1/8" thick. Stock veneers; Lauan, Rotary and
Plain Sliced Birch, Plain Sliced Red and White Oak, Rift Cut Red and White Oak, Plain
Sliced Walnut, Plain Sliced Honduras Mahogany, Quarter Sliced African Mahogany, Plain
Sliced Cherry, and Plain Sliced Maple. Other commercially available hardwood species by
special request. 1/8" Tempered Hardboard, Rustic, and Plastic Laminate. Molded
4-panel, 6-panel, and Classique 6/8 and 7/0 heights only.
CORE: Particle
core-average density 28 to 32 pounds per cubic foot. Conforms to ANSI A-208-1. Core meets
or exceeds Industry Standards 1.S.1. MFPC drop-in core or loose lay-up standard. MFPC
drop-in core or loose lay-up standard. MPC stiles and rails securety bonded to core. Unit
sanded before skin is applied to ensure minimal telegraphing of core and frame parts
through veneers.
STILES: MFPC-1-1/4"
softwood stiles are standard, Hardwood stiles by special request. MPC-1-3/8" hardwood
stiles standard, softwood stiles by special request securety bonded to the core. All
dimensions prior to factory trimming and prefitting.
RAILS: MFPC-2-1/2"
softwood stiles are standard. Hardwood rails by special request. MPC-1-3/8" softwood
rails standard, hardwood rails by special request securety bonded to the core. All
dimensions prior to factory trimming and prefitting.
LOCKBLOCKS: By special
request
ADHESIVES: Type II,
water-resistant bond standard. Type I, waterproof bond by special request.
PREFINISH: Premium
2000, 8 standard tints, 8 standard Rustic colors, and one standard paint finish (see
prefinish pages 4 and 5). Custom tints available by special request. All 6 sides finished
and polywrapped. All standard finishes for interior use only. Finish meets AWI System TR-6
and OP-6 polyurethane.
PRIMED: White all 6
sides by special request.
MAXIMUM SIZE OPENINGS: Cutout
area not exceed 1/2 height of door, must be at least 5" from any edge of door or
hardware cutout. Full cutouts must be at least 8" from any edge of door or hardware
cutout.
MACHINING: Complete
machining to your specification by special request.
PAIR MATCHING: All
species.
PLANT ON MOLDINGS: Standard
or custom profiles. See page 12 for additional information.
GUARANTEE: One-year
standard warranty. Two-year, five-year, and lifetime guarantees available by special
request.
WATER-REPELLENT PRESERVATIVE:
When specified, doors are treated with a water-repellent preservative in compliance
with NWWDA Industry Standards I.S.1.
MOPAK: Mopak is a
tough, transparent polyethylene film protecting our door. Standard on all prefinished
doors. Available by special request on unfinished doors.
TRANSOMS: Matching
transoms - 4/0 to 10/0.
Mohawk Wood Stave Core Door
MFSLC - Drop-in or loose lay-up
MSLC - Stiles and rails securely bonded to
core
Door shown has a Plain Sliced Oak Brown
2025 finish.
APPLICATIONS: MFPC-Used
in high-traffic areas where ultimate hardware holding properties are required. Commercial
in nature. MSLC-Used in high-traffic areas where ultimate hardware holding properties are
required, when AWI 1300 specifications must be met. Architectural in nature.
MAXIMUM SIZE: 4/0 X
10/0.
Thickness: 1-3/8"
and 1-3/4" standard. Other thickness by special request.
FACES: Standard 3-ply
wood veneer of all grades approximately 1/8" thick. Stock veneers; Lauan, Rotary and
Plain Sliced Birch, Plain Sliced Red and White Oak, Rift Cut Red and White Oak, Plain
Sliced Walnut, Plain Sliced Honduras Mahogany, Quarter Sliced African Mahogany, Plain
Sliced Cherry, and Plain Sliced Maple. Other commercially available hardwood species by
special request. 1/8" Tempered Hardboard, Rustic, and Plastic Laminate.
CORE: Particle
core-average density 28 to 32 pounds per cubic foot. Conforms to ANSI A-208-1. Core meets
or exceeds Industry Standards 1.S.1. MFPC drop-in core or loose lay-up standard. MFPC
drop-in core or loose lay-up standard. MPC stiles and rails securely bonded to core. Unit
sanded before skin is applied to ensure minimal telegraphing of core and frame parts
through veneers.
STILES: MFPC-1-1/4"
softwood stiles are standard, Hardwood stiles by special request. MPC-1-3/8" hardwood
stiles standard, softwood stiles by special request securely bonded to the core. All
dimensions prior to factory trimming and prefitting.
RAILS: MFPC-2-1/2"
softwood stiles are standard. Hardwood rails by special request. MPC-1-3/8" softwood
rails standard, hardwood rails by special request securety bonded to the core. All
dimensions prior to factory trimming and prefitting.
ADHESIVES: Type II,
water-resistant bond standard. Type I, waterproof bond by special request.
PREFINISH: Premium
2000, 8 standard tints, 8 standard Rustic colors, and one standard paint finish (see
prefinish pages 4 and 5). Custom tints available by special request. All 6 sides finished
and polywrapped. All standard finishes for interior use only. Finish meets AWI System TR-6
and OP-6 polyurethane.
PRIMED: White all 6
sides by special request.
MAXIMUM SIZE OPENINGS: Cutout
area not exceed 1/2 height of door, must be at least 5" from any edge of door or
hardware cutout. Full cutouts must be at least 8" from any edge of door or hardware
cutout.
MACHINING: Complete
machining to your specification by special request.
PAIR MATCHING: All
species.
PLANT ON MOLDINGS: Standard
or custom profiles. See page 12 for additional information.
GUARANTEE: One-year
standard warranty. Two-year, five-year, and lifetime guarantees available by special
request.
WATER-REPELLENT PRESERVATIVE: When
specified, doors are treated with a water-repellent preservative in compliance with NWWDA
Industry Standards I.S.1.
MOPAK: Mopak is a
tough, transparent polyethylene film protecting our door. Standard on all prefinished
doors. Available by special request on unfinished doors.
TRANSOMS: Matching
transoms - 4/0 to 10/0.
All Mohawk Flush Doors are manufactured
to meet or exceed NWWDA Industry Standards I.S.1 Series and AWI Quality Standards Section
1300 |
