The Doors Of Mohawk - Page 16

Mohawk 20 Minute Fire Door

MFD20P - D- Particle Core – Drop-in Core or loose lay-up

MFD20S - D – Wood Stave – Drop-in Core or loose lay-up

MFD20P - E – Wood Stave – Edge banded core

MFD20S - E– Wood Stave – Edge banded core

Door shown has a Plain Sliced Oak Walnut 2026 Teak finish.

APPLICATIONS: Used in commercial and architectural openings where a 20 minute label is required by building codes.

LABEL SERVICE: Warnock Hersy International.

MAXIMUM SIZE: Single 4/0 X 9/0; pairs and double egress 8/0 x 9/0.

Thickness: 1-3/4".

FACES: Standard 3-ply wood veneer of all grades approximately 1/8" thick. Stock veneers; Lauan, Rotary and Plain Sliced Birch, Plain Sliced Red and White Oak, Rift Cut Red and White Oak, Plain Sliced Walnut, Plain Sliced Honduras Mahogany, Quarter Sliced African Mahogany, Plain Sliced Cherry, and Plain Sliced Maple. Other commercially available hardwood species by special request. 1/8" Tempered Hardboard, Rustic, and Plastic Laminate. Molded 4-panel, 6-panel, and Classique 6/8 heights only.

CORE: Particle core-average density 28 to 32 pounds per cubic foot. Conforms to ANSI A-208-1. Core meets or exceeds Industry Standards 1.S.1. MFPC drop-in core or loose lay-up standard. MFPC drop-in core or loose lay-up standard. MPC stiles and rails securely bonded to core. Unit sanded before skin is applied to ensure minimal telegraphing of core and frame parts through veneers.

STILES: MFPC- (MFD20P-D and MFD20S-D) 1-1/4" softwood stiles are standard, Hardwood stiles by special request. MPC-1-3/8" hardwood stiles standard, softwood stiles by special request securely bonded to the core. All dimensions prior to factory trimming and prefitting.

RAILS: MFD20P-D and MFD20S-D) 2-1/2" softwood rails are standard. Hardwood rails by special request. (MPD20P-E and MFD29S-E) 1-3/8" softwood rails standard, hardwood rails by special request securely bonded to the core. All dimensions prior to factory trimming and prefitting.

ADHESIVES: Type II, water-resistant bond standard. Type I, waterproof bond by special request..

PREFINISH: Premium 2000, 8 standard tints, 8 standard Rustic colors, and one standard paint finish (see prefinish pages 4 and 5). Custom tints available by special request. All 6 sides finished and polywrapped. All standard finishes for interior use only. Finish meets AWI System TR-6 and OP-6 polyurethane.

PRIMED: White all 6 sides by special request.

MAXIMUM SIZE OPENINGS: 1200 square inches, metal vision panel ¼" wire glass, maximum width 30", maximum height 40" Cutout must be at least 6" from edge of door or hardware cutout.

ASTRAGALS: Yes, However, with treated stiles, no astragals required. Astragal machining available.

HARDWARE: Hinge 4–1/2" x 4-1/2" maximum leaf size. Cylinder lock 2-1/2" x 5" backset maximum size, minimum latch throw ½". Mortise lock 4-3/8" x 6-1/2" maximum size.

DEADBOLT: 1-1/2" maximum size.

EXIT DEVICE: No. FLUSHBOLT: Yes.

VIEWERS: 1" maximum.

MACHINING: Complete machining to your specifications by special request.

PAIR MATCHING: All species.

PLANT ON MOLDINGS: Standard or custom profiles. See page 12 for additional information.

GUARANTEE: One-year standard warranty. Two-year, five-year, and lifetime guarantees available by special request.

WATER-REPELLENT PRESERVATIVE: When specified, doors are treated with a water-repellent preservative in compliance with NWWDA Industry Standards I.S.1.

Mohawk 45/60/90 Minute Fire Doors

MFD45 - 45 Minute Mineral Core C Label

MFD60 - 60 Minute Mineral Core B Label

MFD90 - 90 Minute mineral Core B Label

Door shown has a Plain Sliced Oak Gray 2021 Teak finish.

APPLICATIONS: Used in commercial and architectural openings where a 45, 60, or 90 minute label is required by building codes.

LABEL SERVICE: Warnock Hersey International, Underwriters Laboratory.

MAXIMUM SIZE: 45 Minute C Label, 60 and 90 Minute B Label-Single 4/0 x 10/0; pairs and double egress 8/0 x 8/0.

Thickness: 1-3/4".

FACES: Standard 3-ply wood veneer of all grades, approximately 1/8" thick. Stock veneers; Lauan, Rotary and Plain Sliced Birch, Plain Sliced Red and White Oak, Rift Cut Red and White Oak, Plain Sliced Walnut, Plain Sliced Honduras Mahogany, Quarter Sliced African Mahogany, Plain Sliced Cherry, and Plain Sliced Maple. Other commercially available hardwood species by special request. 1/8" Tempered Hardboard, Rustic, 1/16" or 1/8" Plastic Laminate.

CORE: Incombustible, non-asbestos mineral core. Engineered to meet label requirements.

STILES: 1" thick G.P. Firestop with ¼" wood outer laminated to Poplar, Hemlock, or denser species – standard. Hardwood stiles by special request . Direct screw withdrawal 1130.4 lbs.

RAILS: 2" Firestop top and bottom rails standard. 5" Firestop top or bottom rails by special request.

LOCKBLOCKS: 5" X 18" Firestop lockblocks by special request.

ADHESIVES: Type II, water-resistant bond standard. Type I, waterproof bond by special request.

PREFINISH: Premium 2000, 8 standard tints, 8 standard Rustic colors, and one standard paint finish (see prefinish pages 4 and 5). Custom tints available by special request. All 6 sides finished and polywrapped. All standard finishes for interior use only. Finish meets AWI System TR-6 and OP-6 polyurethane.

PRIMED: White all 6 sides by special request.

MAXIMUM SIZE OPENINGS: Maximum opening, 45 Minute C Label – 1296 square inches, maximum width 30", maximum height 54". Metal or wood veneered metal vision panel ¼" wire or Firelite clear glass, 60 and 90 Minute B Label-100 square inches, maximum width 10", maximum height 33". Metal or wood veneered metal vision panel ¼" wire or Firelite clear glass.

METAL EDGES AND ASTRAGALS: Available in 18 or 20 gauge metal, minimum overlap of 1". Must be attached with a minimum #8 screw, on center, 4" from cutouts. Astragal machining available by special request. For an additional cost 2" Firestop stiles on the meeting edges can be specified eliminating the need for metal edges and astragals.

HARDWARE: Hinges – 41/2" x 4-1/2" maximum leaf size. Cylinder lock 5" backset maximum. Minimum latch throw ½". Mortise lock 4-3/8" x 6-1/2" maximum size..

PLANT ON MOLDINGS: Standard or custom profiles. See page 12 for additional information.

MACHINING: Complete machining to your specifications by special request.

PAIRS MATCHING: All species.

GUARANTEE: Five-year standard warranty. Lifetime by special request.

MATCHING TRANSOM PANELS: Maximum width 4/0, maximum height 3/0. Single swing locations only.

LOUVERS: Must be listed fusible link type, must be a minimum of 10" from the door bottom and 6" from door edge or any hardware cutout. Maximum width of cutout 24". Maximum height of cutout 24".

All Mohawk Flush Doors are manufactured to meet or exceed NWWDA Industry Standards I.S.1 Series and AWI Quality Standards Section 1300