The Doors Of Mohawk - Page 29

3-ply wood veneers in Premium, Good, and Sound grades, balanced, center, running and slipped matched, in 1/8" thick door skins, face veneers 1/32" to 1/50" thick.

These 3-ply veneer premanufactured door skins are hot pressed and then the plywood unit is cold pressed to the core and frame. Stocking species for immediate manufacture (4 weeks delivery): Lauan, Rotary Birch, Select Red or White Birch, Uniform Lite Birch, Plain Sliced Red and White Oak, Plain Sliced Walnut, Plain Sliced American Black Cherry, Plain Sliced African and Honduras Mahogany. Special order species extended lead time (8weeks): Plain Sliced American Beech, Quarter Sliced White Ash, Plain Sliced Natural Ash, Plain Sliced Euro Beech, Quarter Sliced Euro Beech, Plain Sliced Red and White Birch, Plain Sliced Butternut, Quarter Sliced Natural Birch, Quarter Sliced Cherry, Grey Elm, hawaiian Koa, Quarter Sliced White Maple, Quarter Sliced Natural Maple, Rotary Maple, Bird’s-Eye Maple, Rotary Oak, Quarter Sliced White Oak, Plain Sliced Poplar, Quarter sliced Redwood, Plain Sliced Sapele. Rotary White Oak 1-Piece face, Santos (Rosewood), Quarter Sliced English Sycamore and Quarter Sliced Walnut.

1-PLY PLASTIC LAMINATE:
Faces from Formica, Nevamar, Pionite and Wilson-Art.
1-PLY:
Tempered hardboard – Modulus of rupture 8500 PSI. Meets or exceeds ANSI/AHA – 135.4 1982 Standards.
1-PLY:
Rustic – Modulus of rupture 8500 PSI. Meets or exceeds ANSI/AHA – 135.4 1982 Standards. For additional information see veneer section.

Particle core low density specifically design for door core 28 to 32 lbs. per cubic foot, meets or exceeds ANSLA-208-1-1989 for grade 1-LD-1. Fare screw pull 90 lbs. Resists warping – superior dimensional stability. Provides full support for cut-outs at light and louver openings, excellent bonding capabilities.

1-1/4"softwood stiles are standard. Douglas fir or similar species. Specific gravity of Douglas fir .41 – approximate screw-holding 495 load lbs. 1-1/4" hardwood stiles by special request. Specific gravity and screw-holding of most popular species: Birch .55 approximate screw-holding 890 lbs., Cherry .47 approximate screw-holding 650 load lbs., Maple .56 approximate screw-holding 923 load lbs., Red Oak .54 approximate screw-holding 858 load lbs., White Oak .60 approximate screw-holding 858 load lbs., Poplar .40 approximate screw-holding 470 load lbs., Walnut .61 approximate screw-holding 1095 load lbs., African and Honduras Mahogany .45 approximate screw-holding 596 load lbs. Special framing – any width stile to your specifications by special request. Matching edge veneer by special request.

All dimensions prior to factory trimming and prefitting.

2-1/2" standard 12" maximum top and/or bottom rail. Softwood standard. Hardwood by special request.

All dimensions prior to factory trimming and prefitting.

2-5/8" 20. Softwood by special request.

Type II is standard. Type II is a water-resistant interior glue which must withstand the bond test described in NWWDA T.M.6 specifications. Type I by special request. Type I adhesive is a waterproof exterior glue and must withstand the bond test described in NWWDA T.M.6 specifications.

Prefinished doors by one of the largest prefinished door manufacturers in the industry. The prefinishing coats applied over all six sides of the door seal the door completely and enhance the natural beauty of the veneer. We have a complete color range in our seven standard tints: Clear, Teak, Red, Brown, Dark Brown, Walnut, and Gray. We also have one standard paint finish – White enamel L-4000. Any custom tint or paint available by special request AWI System 3.5, 10 and 11 are available. System 3 conversion varnish, System 5 catalyzed polyurethane, System 10 conversion varnish opaque and System 11 catalyzed polyurethane opaque. Finishes for interior use only.

See prefinished section for additional information.