STANDARD OPTIONS

Special Blocking

Maximum: top and/or bottom rail 12". Softwood standard. Hardwood by special request.

Wood Louver Chevron Design

Hardwood Louver with approximately 25% free air (of opening size) – with #6 1-1/2" Phillips head brass-plated, self-tapping screws.

Standard stocking sizes :

Other sizes by special request.

Wood Flush Molding Profile

Hardwood Flush Molding for 1/8" or ¼" glass can be ordered for any size cut-out, glazed or open. Mitered corners. If doors are ordered open molding is permanently attached to one side, on the other side the molding is tacked in for easy removal. Door cut-out is 1/8" over glass dimension. Available for 1-3/8" and 1-3/4" doors.

	Wood Lip Molding Profile Hardwood Lip Molding for 1/8" or ¼" glass can be ordered for any size cut-out, glazed or open, Mitered corners. If doors are ordered open molding is permanently attached to one side, on the other side the molding is tacked in for easy removal. Door cut-out is 1/8" over glass dimension. Available for 1-3/8" and 1-3/4" doors.
	Wood Lip Molding Profile Hardwood Lip Molding for 1/8" or ¼" glass can be ordered for any size cut-out, glazed or open. Mitered corners. If doors are ordered open molding is permanently attached to one side, on the other side the molding is tacked in for easy removal. Door cut-out is 1/8" over glass dimension. Available for 1-3/8" and 1-3/4" doors.
	Wood Light Insert Hardwood Light Inserts are supplied with #6 1-1/2" Phillips head brass-plated, self-tapping steel screws. Door cut-out is 1" over glass size in height and width, 1/8", ¼" or ½" insulated glass available. All glazing material is safety glass and meets CFSC standard 16 CFR1201 and ANSI 2-97-1-1975. Standard stock size: 4" x12"    6"x7" 20"x24" 4"x18"    6"x10" 20"x36" 4"x24" 10"x10" 24"x36" 4"x48"

 Standard Decorative Molding Profile

Other profiles by special request. Basswood, denser species and/or other species by special request.

Dutch Door

When specifying Dutch door, indicate if shelf is required one or both sides, make certain that thickness of shelf is taken into consideration when specifying hardware locations. Shelf and brackets will be shipped separately. Stan-dard widths for shelf are 8", 10" 12" for single and 16", 20" 24" for shelf both sides. Shelf bracket is 1" less than width of shelf. Sheft bracket matching species, thickness 7/8". Rabbeting of Dutch door by special request.

Wicket Door

When specifying Wicket doors, indicate size of call door, size of shelf, one or two shelf brackets, and hand. The top and lock-edge of call door and opening are rabbeted. The call door, shelf and shelf bracket will be shipped separately shelf and bracket with matching species, thickness 7/8". Rabbeting of call door by special request.

Transom

Sizes available 4/0 through 10/0. Doors available with continuous match or end match. Bottom rail of transom runs full width. Bottom rail of transom softwood standard. Matching species by special request.