CONCEALED
FASTENER
ROOF PANELS
MORIN
Concealed Fastener Roof Systems are fabricated from galvanized steel,
galvalume, aluminum, copper, or stainless steel and produced using the
rollforming technique. Extended weather ability is achieved with our coatings
in a wide variety of finishes and full-color range. Roof panel widths
extend from 12-24 inches, with lengths exceeding 200 feet.
The MORIN
Concealed Fastener Roof Systems are also available for on-site fabrication.
The portable rollforming equipment can produce panels in excess of 200
feet. Site forming reduces the high cost of freight, since the material
is shipped in coil form to minimize the number of truck loads required.
RETRO-FIT
Replacing worn out
or leaking roof systems is simplified with the use of MORIN Standing
Seam Roof Panels. Insulation may be added to decrease energy costs while
at the same time the bold colorful panels increase the visibility and
value of a project. Disposal of existing materials is virtually eliminated
since the existing roof remains in place.
TESTING
MORIN Concealed
Fastener Roof Systems are tested periodically to provide architects and
engineers with the technical reports that assure our panels will perform
as required. Static and Dynamic Air and Water Testing (ASTM E-283; ASTM
E-331 and AAMA 501.1-83*) , along with Negative Pressure Testing (UL90
and ASTM E-1592) assure that Morin panels can and will provide an extended
trouble-free roof system. *UL Class A Fire Rating
PROFILES:
|
