NEENAH - Retrofit Grates -Page 36

New from NEENAH -retrofit grates. To be used in new construction or where your plans call for the addition of trees in existing paved areas.

When using in new construction, it is easy to form the concrete to accept the retrofit grate. The grate rests on and overlaps the concrete edge, thus preventing the pavement from spalling.

In existing paved areas there is no need to replace the concrete when your plans call for the addition of trees. Cut concrete, using a concrete saw, and remove. Prepare your soil and plant tree using recommended and approved procedures. Place the grate-the top surface of grate extends over the cut edge and conceals any irregularity of the cut.

Other sizes required? Our engineering and sales staff are anxious to work with you on your special requirements.

Ideal for re-hab work where plans call for trees in existing paved areas. Grate is supported on top of paved surface and has lugs, on the underside, which keep the grate in position. Note 1/4" openings for special pedestrian requirements. Tree opening is expandable. Also available for 5' opening,
Order as R-9002-A.
Weight per set - 310 pounds.

HALF PLAN AND SECTION

Note 1/4" slot openings for special pedestrian requirements. No frame needed when using this grate. Can be used in re-hab work or new construction. Grate rests on paved surface and has lugs on underside which keep grate in position. Tree opening is expandable.
Weight per set - 180 pounds.

HALF PLAN AND SECTION

Retrofit grate with light openings. Grate is supported on top of paved surface and has lugs on the underside, which keep the grate in position.
Light-opening grate is 7 3/4" x 15 3/8" x 5 3/4". Tree opening is expandable.
Weight per set - 435 pounds.

HALF PLAN AND SECTION