Architectural Bird Control (Nixalite of America Inc.)

NIXALITE^® Architectural Bird Control
Effective long lasting protection from bird defacement for any structure. Approved for Heritage and Historical Buildings.

Half-row model used for small ledges less than 2 inches in depth and in conjunction with models N, L and S to achieve proper spacing.

Width	2" (5.1 cm)
Height	3 3/4" (9.5 cm)
Needles	60 per 12" (30.5 cm)

Wall mount barrier for vertical surfaces. Used above narrow ledges less than 2 inches in depth or above other Nixalite^® strips in specific conditions. Excellent for use on columns and angled or sloping surfaces.

Width	3" (7.6 cm)
Height	5 1/2" (14.0 cm)
Needles	120 per 12" (30.5 cm)

Nixalite^® strips are available in powder coat colors to match the installation surface.

Available colors:
Black
Grey
Tan
Blue
White
Red
Green
Bronze
Custom Colors Available!
For more information, call 800/624-1189.

Illustrations shown 50% of actual size

General Specifications (CSI Format)
Fill in the Nixalite Model Information

GENERAL
1.1 DESCRIPTION
1.1.1 Install Nixalite^® strips to prevent birds from landing on specified surfaces.

1.2 QUALITY ASSURANCE
1.2.1 Obtain all installation information from manufacturer.
1.2.2 Use workers completely familiar with Nixalite^® installations.

1.3 SUBMITTALS
1.3.1 Submit all descriptive information from manufacturer.

1.4 PRODUCT HANDLING
1.4.1 Protect Nixalite^® strips from damage before, during and after the installation.

PRODUCTS
2.1 ACCEPTABLE MANUFACTURER
2.1.1 NIXALITE^® OF AMERICA INC., 1025 16th Ave, PO Box 727 East, Moline IL. 61244-0727. Tel: 800/624-1189 Fax 800/624-1196

2.2 MODEL DESIGNATION
2.2.1 Model __________ Nixalite^®
Material: 302 Stainless Steel
Width: ________________
Height: _______________
Base Strip: 1/4" (0.7 cm) wide, flexible
Needles: ______________
Lengths: ______________

2.3 MOUNTING SYSTEMS
2.3.1 Stainless Steel Mounting Clips and hardware as specified by manufacturer

EXECUTION
3.1 EXAMINATION
3.1.1 Examine work area, note any detrimental work conditions
3.1.2 Do not proceed until conditions are corrected

3.2 SURFACE PREPARATION
3.2.1 Clean surface thoroughly before work. Remove bird dung if present.
3.2.2 Remove all overhanging foliage

3.3 INSTALLATION
3.3.1 Install Nixalite^® in accordance with manufacturers installation brochures
3.3.2 Nixalite^® must cover the entire depth of surface, not just perimeter. Cut strips to follow all angles and contours closely
3.3.3 Nixalite^® strips must be tangent to the surface, uniform in appearance and have no end-to-end gaps. Refer to the Surface Depth charts and Space-I-fications in manufacturers brochures.

3.4 INSPECTION
3.4.1 Visually inspect Nixalite^® for debris. Inspect mounting system.

Architectural Bird Control Page - 2