1600 REGULAR ARM INSTALLATION
Installation Drawings
Regular Arm Door Sizes And Catalog Numbers
| MAXIMUM DOOR SIZE
WOOD OR METAL INCHES (METERS) |
NORTON CATALOG
NUMBER FOR CLOSER |
DIMENSIONAL INFORMATION SHOWN
IN INCHES (MILLIMETERS) |
| P MINIMUM CEILING CLEARANCE |
U CLOSER LENGTH |
| NON HOLD OPEN |
HOLD OPEN |
HOLD OPEN F.L. |
NON-HOLD-OPEN |
HOLD OPEN |
HOLD OPEN F.L. |
1600 1680 |
| INTERIOR |
EXTERIOR (INSWING) |
| 1600 |
1680 |
| 32 (0.80) |
- |
1602 1682 |
1602H |
- |
1-1/2 (38) |
1 (25) |
1-5/8 (41) |
- |
8-3/4 (222) |
| 38 (0.95) |
30 (0.75) |
1603 1683 |
1603H |
1603HFL |
2-1/8 (54) |
| 49 (1.20) |
36 (0.90) |
1604 1684 |
1604H |
1604HFL |
9-3/4 (248) |
| 48 (1.20) |
42 (1.05) |
1605 1685 |
160SH |
1605MFL |
| - |
48 (1.20) |
1606 1686 |
1606H |
1606HFL |
*Template position for 100° door opening. Closer can be
templated for door openings to 180° if necessary clearance is available. Where clearance
for regular arm mounting is not available, use top jamb or parallel arm mounting to door
openings to 180°.
All dimensions are tor reference only. Dimensions in
parentheses are millimeters unless noted otherwise. Door sizing information is based on
installation on standard weight doors, 7'0" (2.13m) high 1-3/4" (44 mm) thick:
hung on anti-friction hinges and operating under normal conditions. Doors in excess of
7'8" (2.34 m) high or 1-3/4 (44 mm) thick; unusually heavy doors, doors templated for
openings beyond 150° or doors subject to wind or draft conditions will generally require
the next larger size from that shown in the chart.
|
