1600 ACCESSORIES
The following accessories are available for use with Series
1600 door closers.
The accessories are divided into the basic groups of closer
mounting; Regular Arm, Top Jamb, Parallel Arm, Parallel Rigid Arm and Corner Bracket.
These groups include Arm Brackets for Non-Hold-Open and Hold-Open installations; and
Closer Mounting Brackets and Plates.
The initial statement in each paragraph outlines the
situation for which the accessory is intended. Example:
Molded/Bull Nose Trim: You are attempting
to mount a Regular Arm, Non-Hold-Open closer on a frame with molded or bull nose trim. The
convex frame surface prevents use of the standard non-hold-open mounting shoe.
By referring to the descriptions that follow, the specifier
can determine that it would require a 2403 bracket to complete the installation.
Regular Arm Closers: Brackets for Non-Hold-Open
Arms
Molded/Bull Nose Trim -- #2403 Bracket: For
use where the door frame has molded or bull nose trim which will not accept a standard
non-hold-open shoe. The bracket is mortised into the frame rabbet, and projects beyond the
face of the frame. It wilt accommodate a frame rabbet up to 2" (51 mm) deep.
Molded/Bull Nose Trim -- #2403-3/4 Bracket:
This bracket is similar to -- but longer than -- the 2403 bracket. It is designed to
accommodate frame rabbets from 2" to 2-7/8 (51 mm to 73 mm) deep.
Regular Arm Closers: Brackets for Hold-Open Arms
Molded/Bull Nose Trim -- #80 Bracket: For
use where the door frame has molded or bull nose trim which will not accept a standard
hold-open shoe. It is mortised into the frame rabbet, and projects beyond the face of the
frame. It will accommodate a rabbet up to 2" (51 mm) deep. This bracket is used in
combination with the standard hold-open mounting shoe.
Molded/Bull Nose Trim -- #80-3/4 Bracket:
This bracket is similar to -- but longer than -- the 80 bracket, and will accommodate
frame rabbets Īrom 2" to 2-7/8 (51 mm to 73 mm) deep. This bracket is used in
combination with the standard hold-open mounting shoe.
|
