APPLICATION / ORDERING
Application
The Norton Series 1700 Door Closer is a narrow-style door
closer. Its compact design is intended for installation on interior doors. It offers an
economical option for those doors in a building complex where a heavy-duty, more
sophisticated closer is not warranted. It is available with a molded full cover to provide
a similar appearance to other full-cover closers in the building.
These closers feature independent valves for adjusting
sweep speed, latch speed and optional backcheck cushioning. Both hold-open and non
hold-open closers are packaged with all necessary hardware, allowing them to be installed
either regular arm, top jamb or parallel arm. In addition, these closers are nonhanded,
providing even greater application flexibility.
U.L. Listing
Norton Series 1700 Door Closers with non-hold-open arms are
listed by Underwriters' Laboratories, Inc. for use on labeled fire doors.
ANSI/Federal Specs.
Norton Series 1700 Door Closers have been designed and
manufactured to meet or exceed the requirements of FF-H-121-D and ANSI A156.4-1986 Grade
II Specifications.
Ordering Information:
Use the following outline to select the correct Catalog Number for closer you require.
| |
170 |
2 |
X |
COV |
Closer x Finish See Page 1700-3 |
| Prefix |
First
Three Digits |
Fourth |
|
Suffix |
|
| "J
Prefix" For Top Jamb installed closers with frame reveals from 4 - 7/8"
to 6 - 7/8" (124 to 175mm). Standard closer arm
will accommodate reveals to 4 - 7/8" (124mm). "J" prefixes dosers will not
be packaged for Tri-Style installation. |
First
Three Digits define the basic Series 1700 Door Closer. |
Fourth
Digit - This digit specifies the closer size. See pages 1700-4, 1700-5 and 1700-6
for Sizing Charts. |
|
Suffixes
- Suffixes order the following closer options. "H"
- Orders a closer with a Hold-Open arm.
"BC" - Orders a closer with
backcheck cushioning.
"COV" - Orders the 17P Full
Molded Cover. The cover will be packed in the box with the closer. |
|
Packaging Information
Series 1700 Door Closers are packed for Tri-Style
Installation one to a box. Included are the closer, appropriate arm for Regular Arm or Top
Jamb mounting, soffit plate for Parallel Arm mounting, installation instructions and both
wood screws and machine screws for mounting. When a Full Molded Cover is ordered, it will
be included in the box with the closer.
Tri-Style Installation closers, installed Top Jamb, will
accommodate reveals to 4 - 7/8" (124mm). "J" prefixed closer for reveals
from 4 - 7/8" to 6 - 7/8" (124 to 175mm) will be packaged with the standard top
jamb shoe only.
Special Fasteners
Thru-bolts and grommet nuts (TBGN) or Sex-nuts (SN) are
available to order. |
