COVERS / PLATES

Molded Full Covers

2-1/2" high x 2-1/16" deep x 8-7/8" long (64mm x 52mm x 225mm)

Molded of high-impact U.L. Listed material for completely enclosing the closer body, mounting screws and pinion shaft. This cover is non-handed. It has two notches; one will clear the shaft regardless of the hand of installation. An insert is provided for insertion into the unused notch. Four molded catches engage the closer body for an easy yet secure installation. The cover is available in the sprayed finishes listed on page 1700-3. To order this cover separately, specify Catalog Number 17P x Finish.

Drop Plates:

Series 1700 Door Closers are available with the following Drop Plates for installation on narrow top rails or narrow frame faces. These Drop Plates vary in size when the closer is ordered with or without a full Molded Cover. Order Drop Plates from the chart. Specify finish when ordered separately.

For Drop Plate Requirements see Sizing Charts pages 1700-4,5 and 6.

For more information contact Norton Representative or Nortan^® Door Controls, A Division of Yale Securities Inc., P.O.Box 25288, Charlotte, NC 28229-8010. Telephone: (800) 438-1951. In North Carolina: (704) 283-2101. Fax (704) 289-2875. In Canada, 3160 Orlando Drive, Mississagua, Ontario, Canada L4V 1R5. Telephone: (905) 672-6220. FAX: (905) 672-9022. WATS: (800) 461-3007. © Copyright 1994 Norton Door Controls. All rights reserved. All contents current at time of publication. Norton Door Controls reserves the right to change availibility of any item in this catalog including its design, construction, and/or materials.