ARM & PIVOT OPTIONS
End Load Arm
- Center hung - Double acting.
- Single acting - Frame stop required.
- Non-handed.
- Door must be open for access to screws.
- Available for aluminum, hollow metal and wood doors.
Side Load Arm
- Center hung - Double acting.
- Single acting - Frame stop required.
- Screws accessible when door is open.
- Non-handed (mount screws to inside).
- Aluminum doors and frames only.
Offset Arm
- Single acting - Frame stop required.
- Hung on hinges or pivots (not included).
- Handed when installed.
- Steel channel.
- Available for aluminum, hollow metal and wood doors.
Pivots
- Ball bearing spindle.
- 3/16" vertical adjustment.
- Mounted on floor or threshold.
Optional Intermediate Pivots
- Available in bronze or aluminum in all architectural or
sprayed finishes.
- Can be used with offset arms only.
- Handed.
- 3/4" Offset.
- Door must be beveled1/8" in 2".
Full Mortise (Illustrated)
Intermediate pivots are used to maintain door alignment.
They are available in mortise and surface mounted versions.
| Description |
Part Number |
Ordering Information |
| Full Mortise |
FM492 |
x Hand x Finish |
| Half Mortise |
HM493 |
| Half Mortise |
HS494 |
| Full Surface |
FS495 |
For More Information
Contact your Norton representative or Norton® Door Controls, A
Division of Yale Security Inc., P.O. Box 25288, Charlotte, NC 28229-8010.
Telephones: (800) 438-1951 or (800) 438-1962. In North
Carolina: (704) 283-2101. FAX: (704) 289-2875 or (800) 338-0965. Telex: 572356.
In Canada, 3160 Oriando Drive, Mississauga, Ontario. Canada
L4V 1R5.
Telephone: (416) 672-6220. FAX: (416) 672-9022 or (416)
672-8980. WATS: (800) 461-8989.
|
