architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Norton Door Control   Norton Series 7200 Electomechanical  

Norton Series 7200 Electomechanical - Page 8

   

Norton Series 7200 Electomechanical

Yale Security Inc.

SERIES 7220/7230 MASTER UNITS

Push (Stop) Side Mounting Double Lever Arm

Master Units with Integral Smoke Detector

Series 7220MPDI/7230MPDI : Infinite Hold-Open
Series 7220MPDS/7230MPDS : Selective Hold-Open

Executive™ Door Holder/Release

Series 7220RFI/7230RFI: Infinite Hold-Open
Series 7220RFS/7230RFS: Selective Hold-Open

Single Doors

Master Units with Integral Smoke Detector: Both Series 7220MPDI/7230MPDI or Series 7220MPDS/7230MPDS are self- contained and can be installed to control a single door.

Executive™ Door Holder/Release: both Series7220RFI/ 7230RFI and Series 7220RFS/7230RFS are self-contained and can be installed to control a single door.

Pairs of Doors

Master Unit x Slave Unit: Smoke Detector in the Master Unit controls its own closer-holder solenoid and the solenoid in the Slave Unit.

Master Unit x Tandem Unit: Smoke Detector in the Master Unit signals conditions (Stand-by, Trouble/Alarm) to an alarm systems panel. This panel controls the signal to the hold-open solenoids in both the Master Unit and the Tandem Unit.

Executive Door Holder x Slave Unit: Consult the factory for details of this installation.

These Closer-Holders are surface mounted to the Push (stop) side frame face. The standard mounting for these units requires a minimum ceiling clearance of 3-1/2" (89mm). Where ceiling clearance is between 2" and 3-1/2" (51mm and 89mm), the standard backplate for the Series 7220 or Series 7230 can be inverted to allow for a a drop application. Use of a No. 7299 decorative backplate is recommended to conceal the exposed mounting holes on the standard backplate. Different mounting dimensions are required for the drop application. The double lever arm mounts directly to the door. These units can be installed to accommodate door openings to 180° with a 170° maximum hold-open point.

Door Sizes and List Numbers

Maximum* Door Size Ft. In. (meters) MASTER UNIT CLOSER-HOLDER EXECUTIVE DOOR HOLD/RELEASE MAXIMUM DEGREE OF DOOR OPENING REVEAL RANGE INCHES (MILLIMETER)
INFINITE HOLD-OPEN SELECTIVE HOLD-OPEN INFINITE HOLD-OPEN SELECTIVE HOLD-OPEN
3'-6" (1.10) 7223MPDI 7223MPDS 7223RFI 7223RFS 180° 2-3/4-4(70-102)
165° 4-7 (102-179)
7233MPDI 7233MPDS 7233RFI 7233RFS 180° 4-7(102-179)
4'-0" (1.20) 7224MPD! 7224MPDS 7224RFI 7224RFS 180° 2 3/4-4 (70-102)
165° 4-7 (102-179)
7234MPDI 7234MPDS 7234RFI 7234RFS 180° 4-7(102-179)

 

Minimum* Door Size  Ft. In. (meters) FOR DOOR OPENING OF
2'4" (.70) 180°
2'2" (.65) 100° to 180°

Electrical Data Master Units

MASTER UNIT CATALOG NUMBER NUMBER POWER INPUT LINES* (PAIRS) OPERATING VOLTAGE (INPUT) AMPERAGE DRAW (AMPERES) (CAN BE) USED IN CONJUNCTION WITH MASTER UNIT
SMOKE DETECTOR SOLENOID COIL
STANDBY ALARM
7220MPDI-24 7230MPDI-24 1 24VAC/DC .016 @ 24VDC .035 @ 24VDC .070@ 24VDC Slave Unit 7220MPSI Slave Unit 7230MPSI
7220MPDS-24 7230MPDS-24 Slave Unit 7220MPSS Slave Unit 7230MPSS
7220MPDI-120 7230MPDI-120 1 120VAC .070 @ 24VDC Slave Unit 7220MPSI Slave Unit 7230MPSI
7220MPDS-120 7230MPDS-120 Slave Unit 7220MPSS Slave Unit 7230MPSS
7220MPDI-240x120 7230MPDI-240x120 2 24VAC/DC .035 @ 24VDC Tandem Unit 7220MPTI Tandem Unit 7230MPTI
7220MPDS-240x120 7230MPDS-240X120 Tandem Unit 7220MPTS Tandem Unit 7230MPTS

Electrical Data Door Holder/Release

EXECUTIVE DOOR HOLDER/RELEASE CATALOG NUMBER NUMBER POWER INPUT LINES* (PAIRS) OPERATING VOLTAGE (INPUT) 24VDC AMPERAGE DRAW (AMPERES)
SOLENOID COIL INTERRUPTING SWITCH
7220RFI-120

7230RFI-120

1 120VAC .070@ 24VDC .015@ 210VAC
7220RFS-120 7230RFS-120 1

*Pairs of input lines required to supply Operating Voltage or Voltages to the Unit. Pairs listed do not include signal wires to Alarm Panels nor control wires to other units' solenoids. Maximum/Minimum Operating Voltage Parameters: +10%, -15%



Request for Information / Request a Catalog from Norton Door Control
 
 
 
To request more information from Norton Door Control, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.