SERIES 7220/7230 SUPPORT UNITS
Push (Stop) Side Mounting Double Lever Arm
Units Controlled Remotely by Area/Ceiling Detectors
Support Unit Series 7220MPI/7230MPI:
Infinite Hold-Open
Support Unit Series 7220MPS/7230MPS:
Selective Hold-Open
These Closer-Holders are surface mounted to the Push (stop)
side frame face. The standard mounting for these units requires a minimum ceiling
clearance of 3-1/2" (89mm). Where ceiling clearance is between 2" and
3-1/2" (51mm and 89mm), the standard backplate for the 7220 Series or 7230 Series can
be inverted to allow for a drop application. Use a No. 7298 decorative backplate
is recommended to conceal the exposed mounting holes on the standard backplate. Different
mounting dimensions are required for the drop application. The double lever arm mounts
directly to the door. These units can be installed to accommodate door openings to 180°
with a 170° maximum hold/open point.
The Series 7220MPI/7230MPI and 7220MPS/7230MPS, with double
lever arm, are intended for use with compatible U.L. listed detection equipment.
Door Sizes and List Numbers
| MAXIMUM DOOR SIZE FT. IN. (METERS) |
NORTON CATALOG
NUMBER |
MAXIMUM DEGREE OF
DOOR OPENING |
REVEAL RANGE INCHES
(MILLIMETERS) |
| INFINITE HOLD-OPEN |
SELECTIVE HOLD-OPEN |
| 3'-6" (1.10) |
7223MPI |
7223MPS |
180° |
2-3/4-4 (70-102) |
| 165° |
4-7 (102-179) |
| 7233MPI |
7233MPS |
180° |
4-7 (102-179) |
| 4'-0" (1.20) |
7224MPI |
7224MPS |
180° |
2-3/4-4 (70-102) |
| 165° |
4-7 (102-179) |
| 7234MPI |
7234MPS |
180° |
4-7 (102-179) |
Electrical Data
| SUPPORT UNIT CATALOG NUMBER |
NUMBER POWER INPUT LINES*
(PAIRS) |
OPERATING VOLTAGE (INPUT) |
AMPERAGE DRAW SOLENOID COIL
(AMPERES) |
(CAN BE) USED IN CONJUNCTION
WITH |
| 7220MPI-24 7230MPI-24 |
1 |
24VAC/DC |
.070@ 24VAC/DC |
COMPATIBLE SMOKE
DETECTION EQUIPMENT |
| 7220MPS-24 7230MPS-24 |
| 7220MPI-120 7230MPI-120 |
1 |
120VAC |
.035@ 120VAC |
COMPATIBLE SMOKE
DETECTION EQUIPMENT |
| 7220MPS-120 7230MPS-120 |
Maximum/Minimum Operating Voltage Parameters: +10%: -15%
|
