PLATES AND BRACKETS
Regular Arm Closers:
Closer Mounting Plate
Narrow Top Rail -- #7786 Drop Plate: For use where
the narrow top rail of the door prevents the closer from being mounted directly to the
door surface. This Drop Plate must be used for any Series 7700 or Series 7780 closer
mounted on a top rail between 1 -7/8" and 3-3/8" (48 mm and 86 mm) in height.
Top Jamp Closers: Closer Mounting Plate
Narrow Frame -- #7786 Back Plate: For use where a
narrow frame face prevents the closer from being mounted directly to the frame. This Back
Plate must be used for any Series 7700 closer mounted on a frame between 1-7/8" and
3-1/8" (48 mm and 79 mm) in height.
Low Ceiling Clearance -- Overhead Door Holder -- #7787
Drop Plate: For use where the ceiling clearance is between 1-7/8" and 3-7/8"
(48 mm and 98 mm) or where a surface or concealed overhead door holder prevents normal top
jamb mounting. This plate drops the closer and allows the arm mounting screws to clear the
bottom of the door holder. This places the centerline of the arm mounting screws at
3-1/4" (83 mm) from the top of the door.
Parallel Arm Closers:
Brackets for Non-Hold-Open Arms
Standard Installation -- #1618 Soffit Plate: This
soffit plate is supplied standard with parallel arm closers. It can be mounted where the
frame soffit is as narrow as 1" (25 mm).
Mounting between doors -- #2018 Soffit Bracket: For
use where insufficient space between companion doors does not permit use of other soffit
plates. This bracket permits mounting of the closer between doors with as little as
3" (76 mm) of header space. Permits closer arm to clear up to 5/8" (16 mm) high
stop. |
