PLATES AND BRACKETS
Parallel Arm Closers:
Closer Mounting Plate
Narrow Top Rail -- #7788 Drop Plate: For use where a
narrow top rail prevents the closer from being mounted directly to the door surface. This
Drop Plate can be used to mount a closer on a top rail as narrow as 2-3/8" (60 mm) in
height.
Parallel Rigid Arm Closers:
Brackets for Non-Hold-Open and Hold-Open Arms
Standard -- #2019S Spacer Block: For use where a
narrow frame soffit does not provide adequate support for the soffit plate. Supplied as
standard with all parallel rigid arm closers.
Flush Rabbetted Transom -- #2019L Angle Bracket: For
use where flush transom conditions prevent mounting of the standard soffit plate. This
bracket is used in combination with the standard soffit plate.
Narrow Frame -- #6890 Support Bracket: For use where
the frame is narrow, and the soffit plate cannot be mounted directly to the frame soffit
or rabbet. Used in combination with the #6891 Spacer Block on blade stop frames to provide
extra support and needed clearance of the blade stop.
Clearance/Support Blade Stop -- #6891 Spacer Block: For
use where the door frame has a blade stop and the soffit plate must be mounted on the
frame rabbet. This accessory is used in combination with the standard Spacer Block to
provide clearance of the blade stop.
Closer Mounting Plate: Where a closer mounting plate
is required for Parallel Rigid Arm Closers, refer to the Parallel Arm Closer Mounting
Plate #7788 at top of this page. |
