BRACKETS AND PLATES
Corner Brackets for Closer Mounting
For closer sizing information use the Parallel Arm Sizing
Chart on page 7700-6. The use of a corner bracket requires a door closer of the opposite
hand from that of the door when ordering handed closers.
Mounting Opposite Hinge Side -- #7798 Standard Drop
Corner Bracket: For use where it is desired to mount a regular arm non-hold-open
closer.
Extra-Drop Mounting Opposite Hinge Side -- #7797 Corner
Bracket: For use where it is desired to mount a regular arm hold-open closer, or where
it is necessary for a regular arm non-hold-open closer to clear a separate overhead door
holder. This bracket drops the closer 1 -1/8" (29 mm) lower than the #7798 Comer
Bracket.
Adapter Plates for Closer Mounting
Replacing Series 7003M, 7004, 7005 or 7006 Closers --
#7789 Adapter Plate: For use when replacing Series 7003M, 7004. 7005 or 7006 closers
with a Series 7700 closer. Employs existing holes in either door or frame. This adapter
plate is used for all regular arm, top jamb or parallel arm closer installations.
Replacing Series 7404, 7405 or 7406 Closers -- #7790
Adapter Plate: For use when replacing Series 7404, 7405 or 7406 Closers with a Series
7700 closer. Employs existing holes in either door or frame. This adapter plate is used
for all regular arm, top jamb or parallel arm installations. |
