 ACCESSORIES
Regular Arm Closers: Closer Mounting Plates
Narrow Top Rail -- #8146 Drop Plate: For
use where the narrow top rail of the door prevents the closer from being mounted directly
to the door surface. This Drop Plate must be used for any Series 8000 closer mounted on a
top rail between 1-9/16" and 2-7/16" (40 mm and 62 mm) in height, or any Series
8080 closer mounted on a top rail between 1-7/16" and 2-5/16" (36 mm and 59 mm)
in height.
Concealed Door Holder -- #8146 Drop Plate:
For use where a concealed door holder prevents normal mounting of the closer to the door.
This is the same plate used for narrow rail mounting, but is inverted for this application
to permit the mounting screws to clear the bottom of the door-holder preparation in the
top rail of the door. This places the centerline of the plate's upper mounting screws at
2-3/16" (56 mm) from the top of the door.
Regular Arm Closers: Molded Full Cover
Installations
Exposed Back -- #8445 Molded Full Cover Decorative
Back Plate: For use on doors with glass lites where a closer with molded full
cover is installed and the closer back is exposed. This plate covers the back of the
installation to give a pleasing appearance from the reverse side.
Exposed Back/Narrow Top Rail --
Exposed Back/Concealed Door Holder --
#8446 Molded Full Cover Drop Plate Kit:
For use with molded full cover installation when an 8146 Plate is needed as a drop plate
on a narrow top rail, or as a clearance plate for a concealed door holder, and the closer
back is exposed. Kit contains an 8146 Drop Plate and an 8445 Decorative Plate.
Regular Arm Closers: Metal Full Cover Installations
Exposed Back -- #8545 Metal Full Cover Decorative
Back Plate: For use on doors with glass lites where a closer with a metal full
cover is installed and the closer back is exposed. This plate covers the back of the
installation to give a pleasing appearance from the reverse side.
Concealed Door Holder -- #8546 Metal Full Cover
Drop Plate: For use where a concealed door holder prevents the normal mounting of
the closer to the door. This plate permits the mounting screws to clear the bottom of
door-holder preparation in the top rail of the door. This places the centerline of the
plate's upper mounting screws at 2-3/16" (56 mm) from the top of the door.
Regular Arm Closers: Metal Full Cover Installations
Exposed Back/Narrow Top Rail -- #8549 Metal Full
Cover Drop Plate Kit: For use with metal full cover installations, when an 8146
Plate is needed as a drop plate on a narrow top rail and the closer back is exposed. Kit
contains an 8146 Drop Plate and an 8545 Decorative Plate.
|
