ACCESSORIES

Top Jamb Closers: Closer Mounting Plates

Low Ceiling Clearance -- #8146 Drop Plate: For use where low ceiling clearance prevents normal top jamb mounting. This plate is used when clearance is from 1-7/8" to 2-7/8" (48 mm to 73 mm). Where ceiling clearance is less than 1-7/8" (48 mm) see #8148 Drop Plate detailed in the following text.

Overhead Door Holder -- #8146 Drop Plate: For use where a surface or concealed overhead door holder prevents normal top jamb mounting. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 2-7/8" (73 mm) from the top of the door.

Low Ceiling Clearance -- #8148 Drop Plate: For use where the ceiling clearance is between 1-1/2" and 1-3/4" (38 mm and 44 mm).

Top Jamb Closers: Metal Pull Cover Installations

Low Ceiling Clearance --

Overhead Door Holder --

#8547 Metal Full Cover Drop Plate: For use where low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1 -5/8" and 3-7/8" (41 mm and 98 mm). Or for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98 mm) from the top of the door.

Parallel Arm Closers: Brackets for Non-Hold-Open Arms

Standard Installation -- #1618A Soffit Plate: This soffit plate is supplied standard with parallel arm closers. It can be mounted where he frame soffit is as narrow as 1" (25 mm). PA-5 Parallel Arm Kit: This kit permits converting any Series 8000 Regular Arm Non-Hold-Open closer to Parallel Arm Installation. Kit includes a 1618A soffit plate and Parallel Arm installation instructions.

Mounting between doors -- #2018 Soffit Bracket: For use where insufficient space between companion doors does not permit use of other soffit plates. This bracket permits mounting of the closer between doors with as little as 3" (76 mm) of header space. Permits closer arm to clear up to a 5/8" (16 mm) high stop.