 ACCESSORIES
Parallel Arm Closers: Brackets for Non-Hold-Open
Arms
Narrow Frame/Removable Stop -- #2018B Soffit Plate:
For use where a narrow frame or frame with removable stop does not permit use of the
standard soffit plate. This soffit plate may be mounted on the frame soffit or the frame
rabbet where the stop does not exceed 5/8" (16 mm) in height. All of the screw holes
are in a straight line, requiring as little as 1-1/4" (32 mm) of frame reveal to
mount bracket and maintain good closer arm geometry. Where the frame soffit is as wide as
2" (51 mm), this soffit plate may be used to clear weather-stripping that is up to
1-3/8" (35 mm) wide and 5/8" (16 mm) in height.
Blade/Applied Stop -- #2018D Soffit Plate:
For use where a blade or applied stop does not permit installation of the standard soffit
plate. Mounts to either the frame soffit or rabbet. Since this soffit plate projects
7/8" (22 mm) less than a standard soffit plate, it requires a minimum frame reveal of
1-1/2" (38 mm). Permits closer arm to clear up to a 5/8" (16 mm) high stop.
Flush Transom-#2022 Angle Bracket: For use
where rabbeted or flush transom conditions prevent installation of a soffit plate. Used in
combination with the 1618A soffit plate, or it may be used in combination with the 2018S
soffit plate when it is necessary for the closer arm to clear a separate overhead door
holder.
Extra-Clearance -- #2018S Offset Soffit Plate:
For use where the need for additional clearance prevents use of the standard soffit plate.
This plate mounts to the frame soffit to provide up to 1-1/2" (38 mm) of clearance
when a separate overhead door holder is used. Standard mounting requires a 2-5/8" (67
mm) wide frame soffit. It may also be used where unusually high frame stops or
weather-stripping prevent the use of other soffit plates.
Parallel Arm Closers: Brackets for Hold-Open Arms
Parallel Hold-Open/Fusible-Link Hold-Open -- #1628H
Adapter Plate: This Adapter Plate is supplied standard with all parallel arm
hold-open and fusible-link hold-open closers. It can also be used to convert regular arm
or top jamb hold-open and fusible-link hold-open arms to parallel arm installation. It can
be mounted where the frame soffit is as narrow as 1" (25 mm).
PH-8 Parallel Arm Kit: This kit permits
converting any Series 8000 Regular Arm Hold-Open closer to Parallel Arm installation. Kit
includes a 1628H adapter plate and Parallel Arm installation instructions.
Flush Transom Hold-Open -- #2022 Angle Bracket:
For use where rabbeted or flush transom conditions prevent installation of the standard
1618H hold-open adapter plate. It can also be used to convert regular arm or top jamb
hold-open and fusible-link hold-open arms to parallel arm installation.
Parallel Arm Closers: Closer Mounting Plates
Narrow Top Rail -- #8148 Drop Plate: For
use where a narrow top rail prevents the closer from being mounted directly to the door
surface. This Drop Plate can be used to mount a closer on a top rail as narrow as
2-7/8" (73 mm) in height.
|
